Transition Networks SMHB-TR-16 manual Stacking Units in Rack or on Table

Page 20

3.2 Stacking Units in Rack or on Table

NOTE: StackMaster™TR 16-Port Units are shipped with attached brackets for standard 19-inch rack installation and with attachable feet for table-top installation.

3.2.1 Standard 19-Inch Rack Installation

CAUTION: The StackMaster™TR 16-Port Unit with the SNMP Management Board must be installed at the top of the stack. Failure to observe this caution will invalidate the SNMP network management.

NOTE: Rackmount screws and clip nuts are NOT provided with the

StackMaster™TR 16-Port Units.

To install the StackMaster™TR 16-Port Stack in a standard 19-inch rack:

1.Locate four (4) screws (and clip nuts, if necessary) for each StackMaster™TR 16-Port Unit to be installed.

2.Locate the StackMaster™TR 16-Port Unit to be installed at the bottom of the stack.

3.Carefully align the StackMaster™TR 16-Port Unit between the 19- inch rack mounting rails at the lowest installation position.

4.Install two screws through right front bracket and two screws through left front bracket, using clip nuts if necessary.

5.Carefully align the next StackMaster™TR 16-Port Unit above the StackMaster™TR 16-Port Unit already installed.

6.Repeat steps 4 and 5 in reverse order until all StackMaster™TR 16-Port Units have been installed.

3-2

StackMasterTR

Image 20
Contents StackMaster TR Compliance Information FCC Regulations Canadian RegulationsEuropean Regulations Copyright RestrictionsTable of Contents Preface Introduction Network Parameters Data SheetsResetting StackMasterTR Stack Recovery ProceduresStackMasterTR Replacement ProceduresStackMasterTR Field Upgrades Preface Page Introduction Lobe Connectors ConnectorsRing In/Ring Out Connector Connectors at Back IntroductionInsert/Normal LEDs IndicatorsPower LED Port Status LEDs Management Board LEDsSwitches Active/Passive SwitchesZDL Switch Reset Switch4Mbps/16Mbps Switch Page Site Planning Site ConsiderationsNetwork Parameters Data Sheets TCP/IP Network Parameters Data SheetSnmp Network Parameters Data Sheet Site PlanningSerial Port Parameters Data Sheet Installation Unpacking StackMasterTR 16-Port EquipmentStandard 19-Inch Rack Installation Stacking Units in Rack or on TableInstallation Table-Top InstallationCascading StackMasterTR Units Connecting StackMasterTR to Token Ring Network When adding passive hub to RO portConnecting Units to Power Unmanaged Stack Resetting StackMasterTR 16-Port StackManaged Stack Connecting to Ascii Terminal Bringing up Configuration Software MainSetting Network and Snmp Parameters Network ParametersSnmp Parameters Main snmpResetting the StackMasterTR 16-Port ANY Menu restart ANY Menu quitPower On/Power Off OperationPage Maintenance Fault IsolationLobe Port LED Insert RI LEDNormal RO LED Maintenance Recovery Procedures Replacement Procedures Replacing StackMasterTR 16-Port Unit FusesStackMasterTR 16-Port Field Upgrades Installing Snmp Management BoardMaintenance Installing Snmp Management Board Software Upgrades Software Upgrade at Attached Ascii TerminalObtaining Updated StackMasterTR 16-Port Software Connecting to Ascii TerminalStackMasterTR Quit Resetting the StackMasterTR 16-PortTransferring the File Page Appendix A. Technical Specifications Interface ConnectorDimensions Network StandardsPage Appendix B. Cable Specifications Twisted Pair Cable SpecificationsRJ-45 Pin Specifications Null Modem Cable SpecificationsPage Cable Distance Page Appendix D. Approved European Power Cord Set Approval Organization Marking Blk RedPage Warranty Statement Five Year Warranty Return Procedure If not, and the product is covered by warranty, then

SMHB-TR-16 specifications

Transition Networks SMHB-TR-16 is an advanced media converter designed for the effective management and conversion of data between different network media types. This device offers a robust solution for organizations looking to bridge the gap between fiber optic and copper Ethernet networks seamlessly.

One of the key features of the SMHB-TR-16 is its capability to support multiple data rates, including 10/100/1000 Mbps. This versatility ensures compatibility with a wide range of networking environments, allowing users to integrate legacy systems with modern high-speed networks. The device features auto-sensing capabilities that adapt to the speed of the network, simplifying installation and reducing configuration time.

The SMHB-TR-16 is designed with multiple ports, enabling simultaneous connections for varied network configurations. This multi-port design supports 16 individual Ethernet interfaces, allowing organizations to connect numerous devices without the need for additional hardware. Furthermore, the device is equipped with both SFP (Small Form-factor Pluggable) and RJ-45 ports, offering flexibility in selecting the appropriate connection type based on specific networking scenarios.

Another significant characteristic of the SMHB-TR-16 is its comprehensive support for various network protocols, ensuring compatibility and seamless data flow in diverse environments. The device can handle protocols such as Ethernet, Fast Ethernet, and Gigabit Ethernet, making it a versatile addition to any network infrastructure.

Reliability is a hallmark of Transition Networks' products, and the SMHB-TR-16 is no exception. It is built to withstand harsh environmental conditions, featuring a ruggedized design that aids in maintaining performance in extreme temperatures and electromagnetic interference.

In terms of management features, the device includes LED indicators for power, link status, and activity monitoring, allowing administrators to effectively manage and troubleshoot network issues. The simplicity of the design makes it easy to integrate into any existing network, ensuring minimal disruptions during deployment.

Overall, the Transition Networks SMHB-TR-16 is an essential networking solution that combines flexibility, reliability, and advanced technology. It is ideal for organizations seeking to enhance their network infrastructure while ensuring compatibility across different media types and speeds. With its rich feature set and robust construction, the SMHB-TR-16 stands out as a reliable choice for modern data communication needs.