Transition Networks SMHB-TR-16 manual Connecting Units to Power

Page 24

3.5 Connecting Units to Power

The StackMaster™TR 16-Port Stack is connected to power by connecting each of the StackMaster™TR 16-Port Units to power.

NOTE: Connect StackMaster™TR 16-Port Units from bottom to top.

To connect the StackMaster™TR 16-Port Stack to power:

1.At StackMaster™TR 16-Port Unit back, locate the Unit power receptacle and associated fuse.

NOTE: Fuse must be installed at correct setting for power source voltage before connecting to AC outlet.

2.Verify that fuse is installed at correct setting for power source voltage.

NOTE: The installed fuse rating is indicated by the reading at lower right corner of fuse holder.

110-120 Orientation

220-240 Orientation

240-220

120-110

110-120

220-240

Fuse Holder

Fuse Holder

If not installed at correct setting for power source voltage:

Carefully open fuse receptacle, using a small flat blade screwdriver.

Rotate fuse holder 180° to the correct rating orientation.

Install fuse holder in correct rating orientation.

Close fuse receptacle.

3.Plug unit end (female) of power cord into StackMaster™TR 16- Port Unit power receptacle.

4.Plug outlet end (male) of power cord into correct voltage AC wall socket.

5.At StackMaster™TR 16-Port Unit front, verify that POWER LED is illuminated.

6.Repeat steps 1 through 5 until all StackMaster™TR 16-Port Units have been powered.

3-6

StackMasterTR

Image 24
Contents StackMaster TR Compliance Information FCC Regulations Canadian RegulationsEuropean Regulations Copyright RestrictionsTable of Contents Preface Introduction Network Parameters Data SheetsResetting StackMasterTR Stack Recovery ProceduresReplacement Procedures StackMasterTR Field UpgradesStackMasterTR Preface Page Introduction Connectors Ring In/Ring Out ConnectorLobe Connectors Connectors at Back IntroductionIndicators Power LEDInsert/Normal LEDs Port Status LEDs Management Board LEDsSwitches Active/Passive SwitchesZDL Switch Reset Switch4Mbps/16Mbps Switch Page Site Planning Site ConsiderationsNetwork Parameters Data Sheets TCP/IP Network Parameters Data SheetSnmp Network Parameters Data Sheet Site PlanningSerial Port Parameters Data Sheet Installation Unpacking StackMasterTR 16-Port EquipmentStandard 19-Inch Rack Installation Stacking Units in Rack or on TableInstallation Table-Top InstallationCascading StackMasterTR Units Connecting StackMasterTR to Token Ring Network When adding passive hub to RO portConnecting Units to Power Resetting StackMasterTR 16-Port Stack Managed StackUnmanaged Stack Connecting to Ascii Terminal Bringing up Configuration Software MainSetting Network and Snmp Parameters Network ParametersSnmp Parameters Main snmpResetting the StackMasterTR 16-Port ANY Menu restart ANY Menu quitPower On/Power Off OperationPage Maintenance Fault IsolationInsert RI LED Normal RO LEDLobe Port LED Maintenance Recovery Procedures Replacement Procedures Replacing StackMasterTR 16-Port Unit FusesStackMasterTR 16-Port Field Upgrades Installing Snmp Management BoardMaintenance Installing Snmp Management Board Software Upgrades Software Upgrade at Attached Ascii TerminalObtaining Updated StackMasterTR 16-Port Software Connecting to Ascii TerminalStackMasterTR Resetting the StackMasterTR 16-Port Transferring the FileQuit Page Appendix A. Technical Specifications Interface ConnectorDimensions Network StandardsPage Appendix B. Cable Specifications Twisted Pair Cable SpecificationsRJ-45 Pin Specifications Null Modem Cable SpecificationsPage Cable Distance Page Appendix D. Approved European Power Cord Set Approval Organization Marking Blk RedPage Warranty Statement Five Year Warranty Return Procedure If not, and the product is covered by warranty, then

SMHB-TR-16 specifications

Transition Networks SMHB-TR-16 is an advanced media converter designed for the effective management and conversion of data between different network media types. This device offers a robust solution for organizations looking to bridge the gap between fiber optic and copper Ethernet networks seamlessly.

One of the key features of the SMHB-TR-16 is its capability to support multiple data rates, including 10/100/1000 Mbps. This versatility ensures compatibility with a wide range of networking environments, allowing users to integrate legacy systems with modern high-speed networks. The device features auto-sensing capabilities that adapt to the speed of the network, simplifying installation and reducing configuration time.

The SMHB-TR-16 is designed with multiple ports, enabling simultaneous connections for varied network configurations. This multi-port design supports 16 individual Ethernet interfaces, allowing organizations to connect numerous devices without the need for additional hardware. Furthermore, the device is equipped with both SFP (Small Form-factor Pluggable) and RJ-45 ports, offering flexibility in selecting the appropriate connection type based on specific networking scenarios.

Another significant characteristic of the SMHB-TR-16 is its comprehensive support for various network protocols, ensuring compatibility and seamless data flow in diverse environments. The device can handle protocols such as Ethernet, Fast Ethernet, and Gigabit Ethernet, making it a versatile addition to any network infrastructure.

Reliability is a hallmark of Transition Networks' products, and the SMHB-TR-16 is no exception. It is built to withstand harsh environmental conditions, featuring a ruggedized design that aids in maintaining performance in extreme temperatures and electromagnetic interference.

In terms of management features, the device includes LED indicators for power, link status, and activity monitoring, allowing administrators to effectively manage and troubleshoot network issues. The simplicity of the design makes it easy to integrate into any existing network, ensuring minimal disruptions during deployment.

Overall, the Transition Networks SMHB-TR-16 is an essential networking solution that combines flexibility, reliability, and advanced technology. It is ideal for organizations seeking to enhance their network infrastructure while ensuring compatibility across different media types and speeds. With its rich feature set and robust construction, the SMHB-TR-16 stands out as a reliable choice for modern data communication needs.