Transition Networks SMHB-TR-16 manual Setting Network and Snmp Parameters, Network Parameters

Page 28

Setting Network and SNMP Parameters

SNMP Network Management is configured by setting network and SNMP parameter values.

Network Parameters

To set the Network parameter values at an attached terminal:

1.At the StackMaster™TR 16-Port Configuration Main Menu MAIN> prompt, type and enter:

MAIN> ip

The StackMaster™TR 16-Port Network Parameters Menu comes up:

 

 

Network Parameters Menu

 

ipaddr

=

192.251.144.253

name

=

NONE

submask =

255.255.255.0

domain

=

NONE

router

=

0.0.0.0

nameserver= 0.0.0.0

Select a parameter [main ==> root menu OR ? ==> help]

IP>

2.Referring to the Site Configuration Data Sheet, type and enter modified configuration values in the format:

IP> <parameter> = <value>

3.Verify the modified configuration values by bringing up the same menu:

IP> ip

The menu is redisplayed with the modified values.

4.Save the configuration values to non-volatile memory by typing and entering:

IP> save

IP> restart

IP> quit

The StackMaster™TR 16-Port restarts and the parameter values entered are written to non-volatile memory.

3-10

StackMasterTR

Image 28
Contents StackMaster TR Compliance Information FCC Regulations Canadian RegulationsEuropean Regulations Copyright RestrictionsTable of Contents Preface Introduction Network Parameters Data SheetsResetting StackMasterTR Stack Recovery ProceduresStackMasterTR Field Upgrades Replacement ProceduresStackMasterTR Preface Page Introduction Ring In/Ring Out Connector ConnectorsLobe Connectors Connectors at Back IntroductionPower LED IndicatorsInsert/Normal LEDs Port Status LEDs Management Board LEDsSwitches Active/Passive SwitchesZDL Switch Reset Switch4Mbps/16Mbps Switch Page Site Planning Site ConsiderationsNetwork Parameters Data Sheets TCP/IP Network Parameters Data SheetSnmp Network Parameters Data Sheet Site PlanningSerial Port Parameters Data Sheet Installation Unpacking StackMasterTR 16-Port EquipmentStandard 19-Inch Rack Installation Stacking Units in Rack or on TableInstallation Table-Top InstallationCascading StackMasterTR Units Connecting StackMasterTR to Token Ring Network When adding passive hub to RO portConnecting Units to Power Managed Stack Resetting StackMasterTR 16-Port StackUnmanaged Stack Connecting to Ascii Terminal Bringing up Configuration Software MainSetting Network and Snmp Parameters Network ParametersSnmp Parameters Main snmpResetting the StackMasterTR 16-Port ANY Menu restart ANY Menu quitPower On/Power Off OperationPage Maintenance Fault IsolationNormal RO LED Insert RI LEDLobe Port LED Maintenance Recovery Procedures Replacement Procedures Replacing StackMasterTR 16-Port Unit FusesStackMasterTR 16-Port Field Upgrades Installing Snmp Management BoardMaintenance Installing Snmp Management Board Software Upgrades Software Upgrade at Attached Ascii TerminalObtaining Updated StackMasterTR 16-Port Software Connecting to Ascii TerminalStackMasterTR Transferring the File Resetting the StackMasterTR 16-PortQuit Page Appendix A. Technical Specifications Interface ConnectorDimensions Network StandardsPage Appendix B. Cable Specifications Twisted Pair Cable SpecificationsRJ-45 Pin Specifications Null Modem Cable SpecificationsPage Cable Distance Page Appendix D. Approved European Power Cord Set Approval Organization Marking Blk RedPage Warranty Statement Five Year Warranty Return Procedure If not, and the product is covered by warranty, then

SMHB-TR-16 specifications

Transition Networks SMHB-TR-16 is an advanced media converter designed for the effective management and conversion of data between different network media types. This device offers a robust solution for organizations looking to bridge the gap between fiber optic and copper Ethernet networks seamlessly.

One of the key features of the SMHB-TR-16 is its capability to support multiple data rates, including 10/100/1000 Mbps. This versatility ensures compatibility with a wide range of networking environments, allowing users to integrate legacy systems with modern high-speed networks. The device features auto-sensing capabilities that adapt to the speed of the network, simplifying installation and reducing configuration time.

The SMHB-TR-16 is designed with multiple ports, enabling simultaneous connections for varied network configurations. This multi-port design supports 16 individual Ethernet interfaces, allowing organizations to connect numerous devices without the need for additional hardware. Furthermore, the device is equipped with both SFP (Small Form-factor Pluggable) and RJ-45 ports, offering flexibility in selecting the appropriate connection type based on specific networking scenarios.

Another significant characteristic of the SMHB-TR-16 is its comprehensive support for various network protocols, ensuring compatibility and seamless data flow in diverse environments. The device can handle protocols such as Ethernet, Fast Ethernet, and Gigabit Ethernet, making it a versatile addition to any network infrastructure.

Reliability is a hallmark of Transition Networks' products, and the SMHB-TR-16 is no exception. It is built to withstand harsh environmental conditions, featuring a ruggedized design that aids in maintaining performance in extreme temperatures and electromagnetic interference.

In terms of management features, the device includes LED indicators for power, link status, and activity monitoring, allowing administrators to effectively manage and troubleshoot network issues. The simplicity of the design makes it easy to integrate into any existing network, ensuring minimal disruptions during deployment.

Overall, the Transition Networks SMHB-TR-16 is an essential networking solution that combines flexibility, reliability, and advanced technology. It is ideal for organizations seeking to enhance their network infrastructure while ensuring compatibility across different media types and speeds. With its rich feature set and robust construction, the SMHB-TR-16 stands out as a reliable choice for modern data communication needs.