Transition Networks SMHB-TR-16 manual Network Parameters Data Sheets

Page 16

2.2 Network Parameters Data Sheets

NOTE: SNMP network management is optional.

The network parameter data sheets are intended to be a permanent record of site-specific network parameter values that will be required for configuring SNMP network management.

TCP/IP Network Parameters Data Sheet

CATEGORYStackMasterTR DEFAULTSITE ENTRY

IP address (ipaddr)

Management station

192.251.144.253

to which asynchronous

 

SNMP reports will be sent.

 

Format: xxx.xxx.xxx.xxx

 

EXAMPLE: 192.251.144.253

 

Subnet mask (submask)

 

Format: xxx.xxx.xxx.xxx

255.255.255.224

EXAMPLE: 255.255.255.224

 

Router (router)

 

Site-specific identifier.

0.0.0.0

Format: x.x.x.x

 

EXAMPLE: 0.0.0.0

 

Name (name)

 

Site-specific identifier

NONE

Format: up to 256 characters

 

EXAMPLE: NONE

 

Domain (domain)

 

Site-specific identifier.

NONE

Format: up to 256 characters

 

EXAMPLE: NONE

 

Name of server

 

(nameserver)

 

Site-specific identifier

0.0.0.0

Format: x.x.x.x

 

EXAMPLE: 0.0.0.0

 

Table 2-1. TCP/IP Network Parameters Data Sheet

2-2

StackMaster™TR

Page 15 Page 17
Image 16
Page 15 Page 17
Contents StackMaster TR Compliance Information FCC Regulations Canadian RegulationsEuropean Regulations Copyright RestrictionsTable of Contents Preface Introduction Network Parameters Data SheetsResetting StackMasterTR Stack Recovery ProceduresStackMasterTR Field Upgrades Replacement ProceduresStackMasterTR Preface Page Introduction Ring In/Ring Out Connector ConnectorsLobe Connectors Connectors at Back IntroductionPower LED IndicatorsInsert/Normal LEDs Port Status LEDs Management Board LEDsSwitches Active/Passive SwitchesZDL Switch Reset Switch4Mbps/16Mbps Switch Page Site Planning Site ConsiderationsNetwork Parameters Data Sheets TCP/IP Network Parameters Data SheetSnmp Network Parameters Data Sheet Site PlanningSerial Port Parameters Data Sheet Installation Unpacking StackMasterTR 16-Port EquipmentStandard 19-Inch Rack Installation Stacking Units in Rack or on TableInstallation Table-Top InstallationCascading StackMasterTR Units Connecting StackMasterTR to Token Ring Network When adding passive hub to RO portConnecting Units to Power Managed Stack Resetting StackMasterTR 16-Port StackUnmanaged Stack Connecting to Ascii Terminal Bringing up Configuration Software MainSetting Network and Snmp Parameters Network ParametersSnmp Parameters Main snmpResetting the StackMasterTR 16-Port ANY Menu restart ANY Menu quitPower On/Power Off OperationPage Maintenance Fault IsolationNormal RO LED Insert RI LEDLobe Port LED Maintenance Recovery Procedures Replacement Procedures Replacing StackMasterTR 16-Port Unit FusesStackMasterTR 16-Port Field Upgrades Installing Snmp Management BoardMaintenance Installing Snmp Management Board Software Upgrades Software Upgrade at Attached Ascii TerminalObtaining Updated StackMasterTR 16-Port Software Connecting to Ascii TerminalStackMasterTR Transferring the File Resetting the StackMasterTR 16-PortQuit Page Appendix A. Technical Specifications Interface ConnectorDimensions Network StandardsPage Appendix B. Cable Specifications Twisted Pair Cable SpecificationsRJ-45 Pin Specifications Null Modem Cable SpecificationsPage Cable Distance Page Appendix D. Approved European Power Cord Set Approval Organization Marking Blk RedPage Warranty Statement Five Year Warranty Return Procedure If not, and the product is covered by warranty, then

SMHB-TR-16 specifications

Transition Networks SMHB-TR-16 is an advanced media converter designed for the effective management and conversion of data between different network media types. This device offers a robust solution for organizations looking to bridge the gap between fiber optic and copper Ethernet networks seamlessly.

One of the key features of the SMHB-TR-16 is its capability to support multiple data rates, including 10/100/1000 Mbps. This versatility ensures compatibility with a wide range of networking environments, allowing users to integrate legacy systems with modern high-speed networks. The device features auto-sensing capabilities that adapt to the speed of the network, simplifying installation and reducing configuration time.

The SMHB-TR-16 is designed with multiple ports, enabling simultaneous connections for varied network configurations. This multi-port design supports 16 individual Ethernet interfaces, allowing organizations to connect numerous devices without the need for additional hardware. Furthermore, the device is equipped with both SFP (Small Form-factor Pluggable) and RJ-45 ports, offering flexibility in selecting the appropriate connection type based on specific networking scenarios.

Another significant characteristic of the SMHB-TR-16 is its comprehensive support for various network protocols, ensuring compatibility and seamless data flow in diverse environments. The device can handle protocols such as Ethernet, Fast Ethernet, and Gigabit Ethernet, making it a versatile addition to any network infrastructure.

Reliability is a hallmark of Transition Networks' products, and the SMHB-TR-16 is no exception. It is built to withstand harsh environmental conditions, featuring a ruggedized design that aids in maintaining performance in extreme temperatures and electromagnetic interference.

In terms of management features, the device includes LED indicators for power, link status, and activity monitoring, allowing administrators to effectively manage and troubleshoot network issues. The simplicity of the design makes it easy to integrate into any existing network, ensuring minimal disruptions during deployment.

Overall, the Transition Networks SMHB-TR-16 is an essential networking solution that combines flexibility, reliability, and advanced technology. It is ideal for organizations seeking to enhance their network infrastructure while ensuring compatibility across different media types and speeds. With its rich feature set and robust construction, the SMHB-TR-16 stands out as a reliable choice for modern data communication needs.
Top Page Image Contents