Transition Networks 33022.B, E-TBT-HB-0804 Ethernet Cable Specifications, Table of Contents

Page 3

ETHERNET CABLE SPECIFICATIONS

Maximum number of terminal devices on Ethernet network:

1024

 

 

10BASE-5 Cable and Connector Specifications

The physical characteristics of the 10BASE-5 cable must meet or exceed IEEE

802.310BASE-5 specifications.

10BASE-5 Cable Characteristics:

Cable type:

RG8 Solid Coaxial (ThickNet)

Impedance:

50 Ω @ 10 MHz

Capacitance:

26pF/ft

Maximum Cable Length:

500 meters (1650 feet)

Maximum number network connections:

100

Minimum distance between connections:

2.5 meters (8.2 feet)

Terminate 10BASE-5 cable at one end using a 50 ohm terminator and at the other end using a 50 ohm terminator grounded to earth ground.

AUI Cable and Connector Specifications

The cable is a special 4-pair individually shielded with an overall braided shield.

Maximum AUI Cable Length:

 

50 meters (165 feet)

AUI Connector Characteristics:

 

 

 

 

AUI Port:

Male DB-15 with locking posts.

 

 

AUI Connection:

Cable shell must be grounded.

 

 

Connector Legend:

1 Logic Ref.

6

Power Return

11 Logic Ref

 

2

Collision+

7

N/C

12

Receive

 

3

Transmit+

8

Logic Ref.

13

Power

 

4

Logic Ref.

9

Collision--

14

Logic Ref.

 

5

Receive+

10 Transmit-

15

N/C

10BaseFL Cable and Connector Specifications

The physical characteristics of the 10BaseFL cable must meet or exceed IEEE

802.310BaseFL specifications.

10BaseFL Cable Characteristics:

Fiber Optic Cable Recommended:

62.5/125 µm multimode fiber

Optional:

100/140 µm multimode fiber

 

85/125 µm multimode fiber

 

50/125 µm multimode fiber

Fiber Optic Transmitter Power:

Average power:

-15.0 dBm

 

Peak power: -12.0 dBm ±1dBm

Fiber Optic Receiver Sensitivity:

Average sensitivity: -27.4 dBm

 

Bit error rate:

≤ 10-10

Maximum Cable Length:

2000 meters (6500 feet)

10BaseFL Connector Characteristics:

ST type connectors (SMA type available upon request)

Table of Contents

1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . 1

The LANMaster T8

. . . . . . . . . . . . . . . . . . . . . .1

Networking the LANMaster T8 .

. . . . . . . . . . . . . . . . . . . . . .2

Connectors, Switch, Indicators,

. . . . . . . . . . . . . . . . . . . . . .3

2 SITE CONSIDERATIONS. . . . . . . . . . . . . . . . . . . . 4 3 INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Unpacking the LANMaster T8 . . . . . . . . . . . . . . . . . . . . . . . .5

Installing LANMaster T8 at Site . . . . . . . . . . . . . . . . . . . . . . .6

Installing Network Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

10BASE-T Requirements

. .7

10BASE-2 Requirements

. .8

10BASE-5 Requirements

. .8

10-Mb/s Network Configuration Guidelines

. .9

Installing Twisted-Pair 10BASE-T Cable

.11

Installing Thinnet 10BASE-2 Cable

.12

Installing Thicknet 10BASE-5 Cable

.13

Powering the LANMaster T8 . . . . . . . . . . . . . . . . . . . . . . . .14

4 OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Monitoring Power LED . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Monitoring Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

5 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . 16

Fault Isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Technical Support Contact . . . . . . . . . . . . . . . . . . . . . . . . .16

WARRANTY STATEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 ETHERNET CABLE SPECIFICATIONS . . . . . . . . . . . . . . . . . . 19 LANMASTER T8 8-PORT HUB SPECIFICATIONS . . . . . . . 21

19

LANMaster™ T8

8-Port Ethernet™ Repeater Hub

i

Page 2 Page 4
Image 3
Page 2 Page 4
Contents TBT-HB-0804 Lanmaster T8 8-PORT HUB Specifications10BASE-2 Cable Specifications 10BASE-T Cable and Connector SpecificationsLANMaster T8 Port Ethernet Repeater Hub Table of Contents Ethernet Cable SpecificationsFeatures IntroductionLANMaster T8 Networking the LANMaster T8 Warranty StatementTechnical Support Contact MaintenanceConnectors and Indicators ConnectorsOperation Site ConsiderationsMonitoring Status LEDs Part Number InstallationPowering the LANMaster T8 Unpacking the LANMaster T8To install the LANMaster T8 on table or other flat surface Installing Thicknet 10BASE-5 CableConnecting to 10BASE-5 Using AUI Drop Cable Connecting to Network Using Transceiver10BASE-T Requirements Installing Network CableInstalling Thinnet 10BASE-2 Cable STRAIGHT-THROUGH/CROSSOVER CABLE/CONNECTORInstalling Twisted-Pair 10BASE-T Cable 10BASE-2 Requirements10BASE-5 Requirements 10-Mb/s Baseband Network Configuration Guidelines

33022.B, E-TBT-HB-0804 specifications

Transition Networks E-TBT-HB-0804,33022.B is a highly specialized network device designed to support the demanding needs of enterprise-grade communications. This high-performance media converter offers a seamless transition between copper-based Ethernet networks and fiber optic networks, making it an ideal solution for businesses looking to enhance their network infrastructure.

One of the main features of the E-TBT-HB-0804,33022.B is its 10/100/1000 Mbps auto-sensing Ethernet ports, which enable users to connect various devices without worrying about compatibility issues. This flexibility ensures that both legacy and modern devices can be integrated into the network, providing a cost-effective solution for organizations seeking to upgrade their systems without a complete overhaul.

The device is built with robust technologies that ensure reliable performance. It supports full-duplex and half-duplex operation modes, allowing for efficient data transmission across the network. Additionally, the E-TBT-HB-0804,33022.B is equipped with advanced Auto-MDI/MDIX capabilities, which eliminate the need for crossover cables and further simplify connections, making setup quicker and more convenient for IT personnel.

In terms of characteristics, the E-TBT-HB-0804,33022.B boasts a compact design that fits easily into any network environment. Its durable construction ensures longevity, while the fanless design contributes to silent operation, making it suitable for noise-sensitive locations. Furthermore, it features LED indicators that provide real-time monitoring of network status and activity, allowing for quick troubleshooting and maintenance.

Another noteworthy aspect of this device is its compatibility with various types of fiber optic cables, including single-mode and multimode fibers. This versatility enables organizations to choose the best cabling solution to meet their specific distance and bandwidth requirements. The E-TBT-HB-0804,33022.B is also designed to support PoE (Power over Ethernet), allowing users to power network devices directly through the Ethernet cable, reducing the number of power adapters needed.

In conclusion, Transition Networks E-TBT-HB-0804,33022.B is an essential tool for businesses seeking to bridge the gap between copper and fiber networks. With its blend of advanced features, reliable technologies, and durable design, it provides a seamless networking experience that can adapt to evolving organizational needs. Whether upgrading an existing network or building a new one, the E-TBT-HB-0804,33022.B is an excellent choice for enhancing connectivity and performance.
Top Page Image Contents