Transition Networks E-TBT-HB-0804, 33022.B specifications Introduction, LANMaster T8, Features

Page 4

1. INTRODUCTION

This guide is intended for the system or network administrator responsible for installing and monitoring a TRANSITION Networks LANMaster™ T8 8-Port Ethernet™ Repeater Hub. A working knowledge of local area network (LAN) operations, including familiarity with communications protocols used on interconnected LANs, is assumed.

The LANMaster T8

The TRANSITION Networks LANMaster T8 8-Port Ethernet Repeater Hub is a 10 Mb/s network device that connects 10BASE-T and 10BASE-2 OR 10BASE-5 Ethernet segments into a single Ethernet network.

X

1

2

3

4

5

6

7

8

LANMaster T8 Front

 

1

2

3

4

 

 

Act

5 6 7 8

AUI

BNC

 

Link Status

LANMaster T8 Back

Features:

Eight fixed RJ-45 twisted-pair connectors at front provide terminal device connections

Optional RJ-45 uplink port connector at front eliminates need for crossover cable between hubs

BNC and AUI connectors at back provide optional connection to EITHER 10BASE-2 OR 10BASE-5

LED indicators at front provide continuous LANMaster T8 network traffic data

The sole purpose of this remedy shall be provided the customer with the replacement or repair of non-conforming goods in the manner described in this Warranty statement. This exclusive remedy shall not be deemed to have failed of its essential purpose so long as TN is willing and able to repair or replace the defective item(s) or refund the purchase price.

TN reserves the right to inspect products claimed to be defective under warranty either at the customer’s location or at TN’s plant. TN assumes no liability for liability charges incidental to the adjustment, service, repairing, removal or replacement of the product, or other costs, or the expense of repairs made outside of its factory, except when made with TN’s prior written consent. Additionally, Transition Networks reserves the right to charge for all testing and shipping incurred, if after testing, a return is classified as “No Problem Found”.

TN’s total liability in connection with the products and their installation to all persons and from all causes in the aggregate, whether in contract, tort, or strict liability, shall not exceed the amount paid to TN for the product directly related to the alleged damage. However, in no event shall TN have any liability to a customer or any third party for products manufactures according to the customer’s specifications.

C. Return Procedure

The customer must follow this procedure for the return of defective items:

1.Locate the serial number(s) of the item(s) to be returned.

2.Determine the date the item(s) was received.

3.Contact Transition Networks Technical Support to determine if the problem can be corrected on site.

If not, and the product is covered by warranty, then:

Call the distributor directly or contact TN.

Request a Return Material Authorization (RMA).

Ship the item, prepaid in original packaging to Transition Networks at the above address.

Include the RMA number on the outside of the carton and/or on the Packing List.

Include a copy of the RMA form.

Include a copy of the original invoice or packing list (if possible) to expedite processing.

The item(s) may be shipped by the customer or the distributor.

Transition Networks will repair or replace the unit, at TN’s discretion, and cover the cost of the return freight to the distributor or to the customer, whichever requested the RMA number.

If the item(s) was received more than five years ago, or if the item(s) is no longer covered by warranty for other reasons, then:

Call the distributor or contact TN.

Request a Material Repair Authorization number (MRA).

Ship the item(s), prepaid, in the original packaging to Transition Networks at the above address.

Include the MRA number on the outside of the carton add/or on the Packing List.

Include a copy of the MRA form.

Include a copy of the original invoice or packing list (if possible) to expedite processing.

Only the customer (end-user) may send the items(s) to TN.

TN will contact the customer after the item(s) have been received, inspected, and a cost estimate of the repair determined.

The repair charges may be billed, with customer’s approval, though the distributor, or

on a prepaid or C.O.D. basis directly to the customer. The charges will include the cost of shipping.

The return authorization numbers are valid only for 90 days from the date issued.

1

LANMaster™ T8

8-Port Ethernet™ Repeater Hub

18

Image 4
Contents Lanmaster T8 8-PORT HUB Specifications TBT-HB-080410BASE-T Cable and Connector Specifications 10BASE-2 Cable SpecificationsLANMaster T8 Port Ethernet Repeater Hub Ethernet Cable Specifications Table of ContentsIntroduction FeaturesLANMaster T8 Warranty Statement Networking the LANMaster T8Maintenance Connectors and IndicatorsConnectors Technical Support ContactSite Considerations OperationMonitoring Status LEDs Installation Powering the LANMaster T8Unpacking the LANMaster T8 Part NumberInstalling Thicknet 10BASE-5 Cable Connecting to 10BASE-5 Using AUI Drop CableConnecting to Network Using Transceiver To install the LANMaster T8 on table or other flat surfaceInstalling Network Cable Installing Thinnet 10BASE-2 CableSTRAIGHT-THROUGH/CROSSOVER CABLE/CONNECTOR 10BASE-T Requirements10BASE-2 Requirements Installing Twisted-Pair 10BASE-T Cable10BASE-5 Requirements 10-Mb/s Baseband Network Configuration Guidelines

33022.B, E-TBT-HB-0804 specifications

Transition Networks E-TBT-HB-0804,33022.B is a highly specialized network device designed to support the demanding needs of enterprise-grade communications. This high-performance media converter offers a seamless transition between copper-based Ethernet networks and fiber optic networks, making it an ideal solution for businesses looking to enhance their network infrastructure.

One of the main features of the E-TBT-HB-0804,33022.B is its 10/100/1000 Mbps auto-sensing Ethernet ports, which enable users to connect various devices without worrying about compatibility issues. This flexibility ensures that both legacy and modern devices can be integrated into the network, providing a cost-effective solution for organizations seeking to upgrade their systems without a complete overhaul.

The device is built with robust technologies that ensure reliable performance. It supports full-duplex and half-duplex operation modes, allowing for efficient data transmission across the network. Additionally, the E-TBT-HB-0804,33022.B is equipped with advanced Auto-MDI/MDIX capabilities, which eliminate the need for crossover cables and further simplify connections, making setup quicker and more convenient for IT personnel.

In terms of characteristics, the E-TBT-HB-0804,33022.B boasts a compact design that fits easily into any network environment. Its durable construction ensures longevity, while the fanless design contributes to silent operation, making it suitable for noise-sensitive locations. Furthermore, it features LED indicators that provide real-time monitoring of network status and activity, allowing for quick troubleshooting and maintenance.

Another noteworthy aspect of this device is its compatibility with various types of fiber optic cables, including single-mode and multimode fibers. This versatility enables organizations to choose the best cabling solution to meet their specific distance and bandwidth requirements. The E-TBT-HB-0804,33022.B is also designed to support PoE (Power over Ethernet), allowing users to power network devices directly through the Ethernet cable, reducing the number of power adapters needed.

In conclusion, Transition Networks E-TBT-HB-0804,33022.B is an essential tool for businesses seeking to bridge the gap between copper and fiber networks. With its blend of advanced features, reliable technologies, and durable design, it provides a seamless networking experience that can adapt to evolving organizational needs. Whether upgrading an existing network or building a new one, the E-TBT-HB-0804,33022.B is an excellent choice for enhancing connectivity and performance.