Installing Thicknet 10BASE-5 Cable

50 ohm terminator

The LANMaster T8 provides a female AUI connector at the back for network connection to 10BASE-5 through an AUI drop cable or to 10BASE-2, 10BASE-T, or 10BASE-FL through a transceiver.

CONNECTING TO 10BASE-5 USING AUI DROP CABLE

To connect to 10BASE-5 cable using AUI drop cable:

1. Locate or build IEEE 802.3 compliant AUI drop cable.

2. Connect AUI drop cable male connector to female AUI (DTE) connector on LANMaster T8.

3. Connect AUI drop cable female connector to the AUI port on a 10BASE-5 cable transceiver or media attachment unit (MAU).

4. Verify that 10BASE-5

segment is terminated at both ends using 50-ohm terminators.

CONNECTING TO NETWORK USING TRANSCEIVER

NOTE: Refer to transceiver documentation for detailed specifications.

To connect to network using transceiver:

1.Locate IEEE 802.3 compliant transceiver with male AUI connector and with required network media connector.

2.Connect transceiver male AUI connector to the female AUI connector on LANMaster T8.

3.Referring to transceiver documentation, connect transceiver network media connector to the network media.

TO FIBER, COAX,

OR TWISTED PAIR

13	LANMaster™ T8

Installing LANMaster T8 at Site

NOTE: Mounting brackets, screws, and rubber feet are provided.

To install the LANMaster T8 on table or other flat surface:

1.Carefully turn LANMaster T8 to side.

2.Install four (4) rubber feet (included with packing material):

•Separate rubber feet.

•Remove protective paper from

adhesive surface of rubber foot.

• Position and secure each rubber foot as shown.

3. Return LANMaster T8 to upright position.

To install the LANMaster T8 mounting bracket under shelf or on wall:

	2	1. Using mounting bracket as a guide, with
		pencil or other marking device, mark screw
		installation locations on wall or under shelf.
1		2. Using Phillips screwdriver, install two (2)
		screws (included with packing material) at
	2	installation locations marked on wall or under
		shelf.
3.	Using Phillips
	screwdriver, install two
	(2) screws (included
	with packing material)
	through mounting
	bracket securely into		3
	LANMaster T8 chassis.
4.	Carefully install
		mounting
		bracket, with
		attached
		LANMaster T8 chassis, to installed mounting screws,
		aligning mounting bracket so that mounting screws
		are secured at narrow end of bracket mounting
8-Port Ethernet™ Repeater Hub				6

33022.B, E-TBT-HB-0804 specifications

Transition Networks E-TBT-HB-0804,33022.B is a highly specialized network device designed to support the demanding needs of enterprise-grade communications. This high-performance media converter offers a seamless transition between copper-based Ethernet networks and fiber optic networks, making it an ideal solution for businesses looking to enhance their network infrastructure.

One of the main features of the E-TBT-HB-0804,33022.B is its 10/100/1000 Mbps auto-sensing Ethernet ports, which enable users to connect various devices without worrying about compatibility issues. This flexibility ensures that both legacy and modern devices can be integrated into the network, providing a cost-effective solution for organizations seeking to upgrade their systems without a complete overhaul.

The device is built with robust technologies that ensure reliable performance. It supports full-duplex and half-duplex operation modes, allowing for efficient data transmission across the network. Additionally, the E-TBT-HB-0804,33022.B is equipped with advanced Auto-MDI/MDIX capabilities, which eliminate the need for crossover cables and further simplify connections, making setup quicker and more convenient for IT personnel.

In terms of characteristics, the E-TBT-HB-0804,33022.B boasts a compact design that fits easily into any network environment. Its durable construction ensures longevity, while the fanless design contributes to silent operation, making it suitable for noise-sensitive locations. Furthermore, it features LED indicators that provide real-time monitoring of network status and activity, allowing for quick troubleshooting and maintenance.

Another noteworthy aspect of this device is its compatibility with various types of fiber optic cables, including single-mode and multimode fibers. This versatility enables organizations to choose the best cabling solution to meet their specific distance and bandwidth requirements. The E-TBT-HB-0804,33022.B is also designed to support PoE (Power over Ethernet), allowing users to power network devices directly through the Ethernet cable, reducing the number of power adapters needed.

In conclusion, Transition Networks E-TBT-HB-0804,33022.B is an essential tool for businesses seeking to bridge the gap between copper and fiber networks. With its blend of advanced features, reliable technologies, and durable design, it provides a seamless networking experience that can adapt to evolving organizational needs. Whether upgrading an existing network or building a new one, the E-TBT-HB-0804,33022.B is an excellent choice for enhancing connectivity and performance.