Fujitsu AP-600RP-USB Hardware Installation, Front Panel, Rear Panel, LED indicators, Reset switch

Page 11

CONNECT2AIR™ WLAN AP-600RP-USB

Page 10 / 62

4 HARDWARE INSTALLATION

4.1Front Panel

LED indicators

LED

Function

Color

Status

Description

PWR

Power indication

Green

On

The power is on.

WAN

Link status

Green

On

An active device is connected to the WAN

 

 

port.

 

 

 

 

 

 

Green

Flashing

The WAN port is sending or receiving data.

WLAN

Wireless activity

Green

Flashing

Sending or receiving data via a wireless

 

 

 

 

link.

LAN 1 - 4

 

 

On

An active station is connected to the corre-

 

Link status

Green

sponding LAN port.

 

 

 

Flashing

The corresponding LAN port is sending or

 

 

 

 

 

 

 

receiving data.

RESET switch

To reset the system settings to factory defaults, please follow the steps:

1.Press the reset button and hold it for more than 10 seconds

2.Release the button

3.After every LED has flashed more than one time and only the LEDs related to a set connection are lighting, the AccessPoint is active again.

4.It may take up to a minute to reconnect to the clients.

All changes made to the AccessPoint are lost when the device is reset. Please refer to Section 8.6.1 “Administrator Toolbox” for details of how to back up your settings.

4.2Rear Panel

 

POWER RESET WAN LAN1 LAN2 LAN3 LAN4 USB

Ports:

 

 

 

Port

Description

POWER

Power socket: DC 12V, 1.0A (minimum)

WAN

The port for connecting your ADSL or cable modem

LAN 1-4

4 switch ports for your networked computers and/or other devices

USB

Connector for any printer with a USB interface (Laser, Inkjet, Matrix)

Image 11
Contents Page Technical Support AP-600RP-USBFCC RF Radiation Exposure Statement FCC InformationFederal Communications Commission FCC Statement CE Declaration of ConformityWlan Overview ContentAppendix a Licensing Information Five steps to success IntroductionDetermine your network knowledge Prepare your PCs and devices to connect to the AccessPointInstall and configure the AccessPoint Install additional features for example, a printer serverIncluded in delivery Functions and FeaturesIeee Standards Wireless Network FundamentalsAd-hoc Mode Peer-to-Peer Workgroup Wlan OverviewInfrastructure Mode Service Set Identification SsidFront Panel Hardware InstallationLED indicators Reset switchProcedure for Hardware Installation Network Basics Network SettingsConfiguration of your Wireless Client Client Network SettingsNetwork Settings Check the Connection Configuration Examples AP-600RP-USB with Adsl Router Connecting the devices to the AP-600RP-USBInstallation Note AP-600RP-USB AP-600RP-USB with Adsl Router advancedAP-600RP-USB with Adsl Modem AP-600RP-USB with Cable Modem AP-600RP-USB Floor Two AP-600RP-USB in repetition mode WDSInstall AP Start-up Tool Software InstallationStart-up and Log Accesspoint ConfigurationSystem Status Static IP Address How to connect to your Internet Service Provider ISPWizard PPP over Ethernet e.g. Adsl connection Dynamic IP AddressPptp Without an ISP L2TPBand modulation type Wireless Settings Country / RegionWireless network ID Ssid Turbo mode / NitroTM modeWEP keys 1, 2, 3 Wired Equivalent Privacy WEP SecurityPrimary Setup Client List IP Pool Starting / Ending AddressNetmask Lease Time minutesAddress Reservation DNS SettingsWAN Type Configuration / Connection to the Internet ISP Wireless Settings Country / Region Encryption AuthenticationWlan Security Security begins when Changing the Standard Password Wireless Security SettingsApplication Wired Equivalent Privacy WEP SettingsWPA for Soho applications Wi-Fi Protected Access WPAWPA Enterprise Mode 802.1x and Radius Server IeeeRadius Server General access mode Access Control ListDdns Dynamic DNS User-specific access listExample configuration of a publicly accessible WEBcam Parametrization of the Ddns client in the AccessPointRelease of the route in the virtual server Example Static IP address Tips for configuring a WDS16 WDS Application Advanced SettingsVirtual Server Increased firewall protection by closing the ports FirewallAdd Firewall Rule Firewall configurationCONNECT2AIR Wlan AP-600RP-USB Requirements Example of a firewall configurationPC 2 in the Internet 192.35.35.10 with destination AP-600RP CONNECT2AIR Wlan AP-600RP-USB 4 DMZ Time ZoneToolbox Administrator ToolboxFirmware Upgrade Configuration on Windows 2000/XP Platforms Access to USB Printers Through WlanCONNECT2AIR Wlan AP-600RP-USB Press Finish TroubleshootingAvailability of source code Appendix a Licensing InformationCONNECT2AIR Wlan AP-600RP-USB CONNECT2AIR Wlan AP-600RP-USB CONNECT2AIR Wlan AP-600RP-USB No Warranty END of Terms and Conditions
Related manuals
Manual 6 pages 5.71 Kb

AP-600RP-USB specifications

The Fujitsu AP-600RP-USB is a leading-edge device designed to cater to the needs of modern businesses and home offices alike. Equipped with powerful technologies and innovative features, this device stands out in its category for providing optimal performance and reliability.

One of the main features of the AP-600RP-USB is its exceptional processing capability. It is powered by a high-performance processor that ensures swift handling of tasks, making it ideal for environments that demand quick data processing and multitasking efficiency. The device is engineered to support various applications, making it a versatile choice for users across different sectors.

Another significant characteristic of the Fujitsu AP-600RP-USB is its ergonomic design. This well-thought-out device is compact and lightweight, facilitating easy placement and transport. It is designed for comfort, ensuring users can operate the device for extended periods without experiencing strain. This is particularly beneficial for businesses that value employee well-being while maximizing productivity.

In terms of connectivity, the AP-600RP-USB features a USB interface, allowing for seamless integration with various peripherals. This feature enhances the device's usability, enabling users to connect keyboards, mice, and storage devices and ensuring a smooth workflow. The inclusion of advanced wireless technologies also allows for easy connections to networks, providing users with the flexibility to work from anywhere within a network range.

Moreover, Fujitsu has incorporated advanced energy-efficient technologies into the AP-600RP-USB, significantly reducing power consumption while maintaining high performance. This not only contributes to lower operational costs for businesses but also aligns with global efforts towards sustainability and energy conservation.

Security is another crucial aspect of this device. The AP-600RP-USB includes robust security features, ensuring that sensitive data remains protected against unauthorized access. This makes it an excellent choice for organizations looking to safeguard their information in an increasingly digital workspace.

In summary, the Fujitsu AP-600RP-USB stands out for its powerful processing capabilities, ergonomic design, versatile connectivity options, energy efficiency, and strong security features. Whether for a corporate setting or a home office, it is designed to deliver an excellent user experience, making it an investment that promises reliability and performance in today’s fast-paced world.