Fujitsu AP-600RP-USB manual Advanced Settings, Virtual Server, Application

Page 46

CONNECT2AIR™ WLAN AP-600RP-USB

Page 45 / 62

8.5Advanced Settings

8.5.1 Virtual Server

The router built into the AP-600RP-USB allows specific ports – and therefore their associ- ated services – to be enabled for communication for particular clients. In this way, local servers or other resources can be released for communication. This is done by selecting a client in the virtual server (specific IP address) and defining the port to open. All requests sent to this port are forwarded through the IP address to the specified computer.

The virtual server acts as a selective "guard" on the WAN side (Internet) in that it grants access to the local network (WLAN/LAN) to specified services, and denies all other ser- vices this right. Each service (used synonymously in this context for a port and the associ- ated application) must be assigned to a particular IP address in the local network so that packet forwarding is possible.

Service

Function

TCP

UDP

AUTH

Authentication Service

113

113

BOOTPC

Bootstrap Protocol Client

 

67

DNS

Domain Name Server

 

53

FTP

File Transfer Protocol

21

 

HTTP

Hyper Text Transfer Protocol

80

 

NETBIOS-SSN

Netbios Session Service

139

 

NNTP

Network News Transfer Protocol

119

 

NPP

Network Printing Protocol

92

 

NTP

Network Time Protokol

123

 

POP3

Post Office Protocol V3

110

 

PPTP

Point to Point Tunneling Protocol (VPN)

1723

 

SMTP

Simple Mail Transfer Protocol

25

 

SNMP

Simple Network Management Protocol

 

161

Telnet

Terminal Emulation Protocol

23

 

TFTP

Trivial File Transfer Protocol

 

69

For example, if you have an FTP server (port 21) at 192.168.1.13, a web server (port 8080) at 192.168.1.12, and a VPN server at 192.168.1.14 (port 173), you need to make the following entries in the virtual server mapping table:

Another example configuration with a WEBcam can be found in Section 8.4.15 DDNS (Dynamic DNS).

Application:

Use a comma (,) or dash (-) if more than one port is to be added – for example: 20, 21 or 20–25 or 20, 25–30, 50. Up to 50 entries can be added to the table. Port ranges are also listed individually in the table.

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Page AP-600RP-USB Technical SupportCE Declaration of Conformity FCC InformationFederal Communications Commission FCC Statement FCC RF Radiation Exposure StatementContent Wlan OverviewAppendix a Licensing Information Introduction Five steps to successInstall additional features for example, a printer server Prepare your PCs and devices to connect to the AccessPointInstall and configure the AccessPoint Determine your network knowledgeFunctions and Features Included in deliveryWlan Overview Wireless Network FundamentalsAd-hoc Mode Peer-to-Peer Workgroup Ieee StandardsService Set Identification Ssid Infrastructure ModeReset switch Hardware InstallationLED indicators Front PanelProcedure for Hardware Installation Network Settings Network BasicsNetwork Settings Client Network SettingsConfiguration of your Wireless Client Check the Connection Configuration Examples Installation Note Connecting the devices to the AP-600RP-USBAP-600RP-USB with Adsl Router AP-600RP-USB with Adsl Router advanced AP-600RP-USBAP-600RP-USB with Adsl Modem AP-600RP-USB with Cable Modem Two AP-600RP-USB in repetition mode WDS AP-600RP-USB FloorSoftware Installation Install AP Start-up ToolAccesspoint Configuration Start-up and LogSystem Status Wizard How to connect to your Internet Service Provider ISPStatic IP Address Dynamic IP Address PPP over Ethernet e.g. Adsl connectionPptp L2TP Without an ISPTurbo mode / NitroTM mode Wireless Settings Country / RegionWireless network ID Ssid Band modulation typeWired Equivalent Privacy WEP Security WEP keys 1, 2, 3Primary Setup Lease Time minutes IP Pool Starting / Ending AddressNetmask Client ListDNS Settings Address ReservationWAN Type Configuration / Connection to the Internet ISP Wireless Settings Country / Region Wlan Security AuthenticationEncryption Wireless Security Settings Security begins when Changing the Standard PasswordWired Equivalent Privacy WEP Settings ApplicationWPA Enterprise Mode Wi-Fi Protected Access WPAWPA for Soho applications Ieee 802.1x and Radius ServerRadius Server Access Control List General access modeParametrization of the Ddns client in the AccessPoint User-specific access listExample configuration of a publicly accessible WEBcam Ddns Dynamic DNSRelease of the route in the virtual server 16 WDS Tips for configuring a WDSExample Static IP address Virtual Server Advanced SettingsApplication Firewall Increased firewall protection by closing the portsFirewall configuration Add Firewall RuleCONNECT2AIR Wlan AP-600RP-USB Example of a firewall configuration RequirementsPC 2 in the Internet 192.35.35.10 with destination AP-600RP CONNECT2AIR Wlan AP-600RP-USB Time Zone 4 DMZFirmware Upgrade Administrator ToolboxToolbox Access to USB Printers Through Wlan Configuration on Windows 2000/XP PlatformsCONNECT2AIR Wlan AP-600RP-USB Troubleshooting Press FinishAppendix a Licensing Information Availability of source codeCONNECT2AIR Wlan AP-600RP-USB CONNECT2AIR Wlan AP-600RP-USB CONNECT2AIR Wlan AP-600RP-USB No Warranty END of Terms and Conditions
Related manuals
Manual 6 pages 5.71 Kb

AP-600RP-USB specifications

The Fujitsu AP-600RP-USB is a leading-edge device designed to cater to the needs of modern businesses and home offices alike. Equipped with powerful technologies and innovative features, this device stands out in its category for providing optimal performance and reliability.

One of the main features of the AP-600RP-USB is its exceptional processing capability. It is powered by a high-performance processor that ensures swift handling of tasks, making it ideal for environments that demand quick data processing and multitasking efficiency. The device is engineered to support various applications, making it a versatile choice for users across different sectors.

Another significant characteristic of the Fujitsu AP-600RP-USB is its ergonomic design. This well-thought-out device is compact and lightweight, facilitating easy placement and transport. It is designed for comfort, ensuring users can operate the device for extended periods without experiencing strain. This is particularly beneficial for businesses that value employee well-being while maximizing productivity.

In terms of connectivity, the AP-600RP-USB features a USB interface, allowing for seamless integration with various peripherals. This feature enhances the device's usability, enabling users to connect keyboards, mice, and storage devices and ensuring a smooth workflow. The inclusion of advanced wireless technologies also allows for easy connections to networks, providing users with the flexibility to work from anywhere within a network range.

Moreover, Fujitsu has incorporated advanced energy-efficient technologies into the AP-600RP-USB, significantly reducing power consumption while maintaining high performance. This not only contributes to lower operational costs for businesses but also aligns with global efforts towards sustainability and energy conservation.

Security is another crucial aspect of this device. The AP-600RP-USB includes robust security features, ensuring that sensitive data remains protected against unauthorized access. This makes it an excellent choice for organizations looking to safeguard their information in an increasingly digital workspace.

In summary, the Fujitsu AP-600RP-USB stands out for its powerful processing capabilities, ergonomic design, versatile connectivity options, energy efficiency, and strong security features. Whether for a corporate setting or a home office, it is designed to deliver an excellent user experience, making it an investment that promises reliability and performance in today’s fast-paced world.
Top Page Image Contents