Fujitsu AP-600RP-USB IP Pool Starting / Ending Address, Netmask, Lease Time minutes, Client List

Page 32

CONNECT2AIR™ WLAN AP-600RP-USB

Page 31 / 62

ered up. The DHCP server settings include the following items and can be “Disabled” or “Enabled”.

•

•

•

•

IP Pool Starting / Ending Address:

Whenever requested to allocate IP addresses, the DHCP server will automatically allo- cate an unused IP address from the IP address pool to the requesting computer. You must specify the start and end address of the IP address pool.

Netmask:

Defines the size of the subnet mask range. 255.255.255.0 (default) permits an address range from 192.168.1.1 to 192.168.1.254, for example. This means that the first three segments must always be identical and that the last segment in the range from 1–254 is freely selectable. Consequently, 254 clients can communicate with each other within the address range 192.168.1.X.

Gateway:

The gateway represents the connection and exchange node (AccessPoint) through which IP networks are connected together. For connections to a different network (e.g., Internet over DSL), the gateway defines the first point of entry for the AccessPoint. No entry is required as the gateway is automatically assigned to all clients via the DHCP server – entering an IP address would define an alternative path.

Lease Time (minutes)

The default time value for clients to retain the assigned IP address. DHCP automati- cally renews IP addresses without client notification. Default is 300 minutes.

Note: Do not forget to adapt the DHCP server to the IP settings of the AccessPoint.

8.4.3 Client List

The table entries represent all devices that have obtained an IP address from the Access- Point's DHCP server. In addition, clients with fixed addressing are also entered in the list

Æsee the next section.

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Page AP-600RP-USB Technical SupportFCC Information Federal Communications Commission FCC StatementCE Declaration of Conformity FCC RF Radiation Exposure StatementContent Wlan OverviewAppendix a Licensing Information Introduction Five steps to successPrepare your PCs and devices to connect to the AccessPoint Install and configure the AccessPointInstall additional features for example, a printer server Determine your network knowledgeFunctions and Features Included in deliveryWireless Network Fundamentals Ad-hoc Mode Peer-to-Peer WorkgroupWlan Overview Ieee StandardsService Set Identification Ssid Infrastructure ModeHardware Installation LED indicatorsReset switch Front PanelProcedure for Hardware Installation Network Settings Network BasicsConfiguration of your Wireless Client Client Network SettingsNetwork Settings Check the Connection Configuration Examples AP-600RP-USB with Adsl Router Connecting the devices to the AP-600RP-USBInstallation Note AP-600RP-USB with Adsl Router advanced AP-600RP-USBAP-600RP-USB with Adsl Modem AP-600RP-USB with Cable Modem Two AP-600RP-USB in repetition mode WDS AP-600RP-USB FloorSoftware Installation Install AP Start-up ToolAccesspoint Configuration Start-up and LogSystem Status Static IP Address How to connect to your Internet Service Provider ISPWizard Dynamic IP Address PPP over Ethernet e.g. Adsl connectionPptp L2TP Without an ISPWireless Settings Country / Region Wireless network ID SsidTurbo mode / NitroTM mode Band modulation typeWired Equivalent Privacy WEP Security WEP keys 1, 2, 3Primary Setup IP Pool Starting / Ending Address NetmaskLease Time minutes Client ListDNS Settings Address ReservationWAN Type Configuration / Connection to the Internet ISP Wireless Settings Country / Region Encryption AuthenticationWlan Security Wireless Security Settings Security begins when Changing the Standard PasswordWired Equivalent Privacy WEP Settings ApplicationWPA for Soho applications Wi-Fi Protected Access WPAWPA Enterprise Mode Ieee 802.1x and Radius ServerRadius Server Access Control List General access modeUser-specific access list Example configuration of a publicly accessible WEBcamParametrization of the Ddns client in the AccessPoint Ddns Dynamic DNSRelease of the route in the virtual server Example Static IP address Tips for configuring a WDS16 WDS Application Advanced SettingsVirtual Server Firewall Increased firewall protection by closing the portsFirewall configuration Add Firewall RuleCONNECT2AIR Wlan AP-600RP-USB Example of a firewall configuration RequirementsPC 2 in the Internet 192.35.35.10 with destination AP-600RP CONNECT2AIR Wlan AP-600RP-USB Time Zone 4 DMZToolbox Administrator ToolboxFirmware Upgrade Access to USB Printers Through Wlan Configuration on Windows 2000/XP PlatformsCONNECT2AIR Wlan AP-600RP-USB Troubleshooting Press FinishAppendix a Licensing Information Availability of source codeCONNECT2AIR Wlan AP-600RP-USB CONNECT2AIR Wlan AP-600RP-USB CONNECT2AIR Wlan AP-600RP-USB No Warranty END of Terms and Conditions
Related manuals
Manual 6 pages 5.71 Kb

AP-600RP-USB specifications

The Fujitsu AP-600RP-USB is a leading-edge device designed to cater to the needs of modern businesses and home offices alike. Equipped with powerful technologies and innovative features, this device stands out in its category for providing optimal performance and reliability.

One of the main features of the AP-600RP-USB is its exceptional processing capability. It is powered by a high-performance processor that ensures swift handling of tasks, making it ideal for environments that demand quick data processing and multitasking efficiency. The device is engineered to support various applications, making it a versatile choice for users across different sectors.

Another significant characteristic of the Fujitsu AP-600RP-USB is its ergonomic design. This well-thought-out device is compact and lightweight, facilitating easy placement and transport. It is designed for comfort, ensuring users can operate the device for extended periods without experiencing strain. This is particularly beneficial for businesses that value employee well-being while maximizing productivity.

In terms of connectivity, the AP-600RP-USB features a USB interface, allowing for seamless integration with various peripherals. This feature enhances the device's usability, enabling users to connect keyboards, mice, and storage devices and ensuring a smooth workflow. The inclusion of advanced wireless technologies also allows for easy connections to networks, providing users with the flexibility to work from anywhere within a network range.

Moreover, Fujitsu has incorporated advanced energy-efficient technologies into the AP-600RP-USB, significantly reducing power consumption while maintaining high performance. This not only contributes to lower operational costs for businesses but also aligns with global efforts towards sustainability and energy conservation.

Security is another crucial aspect of this device. The AP-600RP-USB includes robust security features, ensuring that sensitive data remains protected against unauthorized access. This makes it an excellent choice for organizations looking to safeguard their information in an increasingly digital workspace.

In summary, the Fujitsu AP-600RP-USB stands out for its powerful processing capabilities, ergonomic design, versatile connectivity options, energy efficiency, and strong security features. Whether for a corporate setting or a home office, it is designed to deliver an excellent user experience, making it an investment that promises reliability and performance in today’s fast-paced world.
Top Page Image Contents