Fujitsu AP-600RP-USB manual Example of a firewall configuration, Requirements

Page 50

CONNECT2AIR™ WLAN AP-600RP-USB

Page 49 / 62

Example of a firewall configuration

General network configuration

 

 

WEBcam

 

Laptop 1

 

LAN IP: 192.168.1.90

 

192.168.1.100

 

 

FTP Server

LOCAL

 

 

 

 

192.168.1.12

 

 

 

Port: 21

 

 

 

LOCAL

Laptop 2

LAN

LAN

 

192.168.1.101

 

LOCAL

 

 

 

 

 

AP-600RP-USB

WEB Server

 

WAN

LAN IP: 192.168.1.254

 

192.168.1.13

Desktop PC

 

WAN IP: 212.35.65.205

Port: 80

 

 

 

 

LOCAL

192.168.1.103

 

 

 

LOCAL

 

 

 

Desktop PC 2

212.35.35.10

PUBLIC

Desktop PC 3

any IP

PUBLIC

Requirements

•PCs in the local network have Internet access and can communicate freely with each other

•Desktop PC 2 should be able to configure the AP-600RP-USB (AP WAN IP must be accessible per PING), all other PCs in the Internet (e.g., Desktop PC 3) are blocked for the function.

In order to be able to configure an AccessPoint over the Internet (WAN port), the firewall must be activated. Initially, the firewall is fully open – i.e., it does not block any data traffic to and from the public domain (Internet -> non-trusted). This means that rules must first be defined for correct operation (see overleaf for the configuration).

GENERAL

The firewall blocks all data from and to the non-trusted network: Initial set-

 

tings: Incoming: Discard and Outgoing: Discard. However, data over the

 

router's interface (firewall) should remain active (Forward: Accept).

RULE 1

PCs in the local network (192.168.1.X) with destination AP-600RP

 

(192.168.1.254) are allowed to exchange data "through" the AP Æ Incoming

 

data at the AP

RULE 2

Data originating from the AP-600RP (or Internet) (192.168.1.254) is forwarded

 

to the appropriate PC in the local network (192.168.1.X) Æ Outgoing data at

 

the AP

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Page AP-600RP-USB Technical SupportCE Declaration of Conformity FCC InformationFederal Communications Commission FCC Statement FCC RF Radiation Exposure StatementContent Wlan OverviewAppendix a Licensing Information Introduction Five steps to successInstall additional features for example, a printer server Prepare your PCs and devices to connect to the AccessPointInstall and configure the AccessPoint Determine your network knowledgeFunctions and Features Included in deliveryWlan Overview Wireless Network FundamentalsAd-hoc Mode Peer-to-Peer Workgroup Ieee StandardsService Set Identification Ssid Infrastructure ModeReset switch Hardware InstallationLED indicators Front PanelProcedure for Hardware Installation Network Settings Network BasicsConfiguration of your Wireless Client Client Network SettingsNetwork Settings Check the Connection Configuration Examples AP-600RP-USB with Adsl Router Connecting the devices to the AP-600RP-USBInstallation Note AP-600RP-USB with Adsl Router advanced AP-600RP-USBAP-600RP-USB with Adsl Modem AP-600RP-USB with Cable Modem Two AP-600RP-USB in repetition mode WDS AP-600RP-USB FloorSoftware Installation Install AP Start-up ToolAccesspoint Configuration Start-up and LogSystem Status Static IP Address How to connect to your Internet Service Provider ISPWizard Dynamic IP Address PPP over Ethernet e.g. Adsl connectionPptp L2TP Without an ISPTurbo mode / NitroTM mode Wireless Settings Country / RegionWireless network ID Ssid Band modulation typeWired Equivalent Privacy WEP Security WEP keys 1, 2, 3Primary Setup Lease Time minutes IP Pool Starting / Ending AddressNetmask Client ListDNS Settings Address ReservationWAN Type Configuration / Connection to the Internet ISP Wireless Settings Country / Region Encryption AuthenticationWlan Security Wireless Security Settings Security begins when Changing the Standard PasswordWired Equivalent Privacy WEP Settings ApplicationWPA for Soho applications Wi-Fi Protected Access WPAWPA Enterprise Mode Ieee 802.1x and Radius ServerRadius Server Access Control List General access modeParametrization of the Ddns client in the AccessPoint User-specific access listExample configuration of a publicly accessible WEBcam Ddns Dynamic DNSRelease of the route in the virtual server Example Static IP address Tips for configuring a WDS16 WDS Application Advanced SettingsVirtual Server Firewall Increased firewall protection by closing the portsFirewall configuration Add Firewall RuleCONNECT2AIR Wlan AP-600RP-USB Example of a firewall configuration RequirementsPC 2 in the Internet 192.35.35.10 with destination AP-600RP CONNECT2AIR Wlan AP-600RP-USB Time Zone 4 DMZToolbox Administrator ToolboxFirmware Upgrade Access to USB Printers Through Wlan Configuration on Windows 2000/XP PlatformsCONNECT2AIR Wlan AP-600RP-USB Troubleshooting Press FinishAppendix a Licensing Information Availability of source codeCONNECT2AIR Wlan AP-600RP-USB CONNECT2AIR Wlan AP-600RP-USB CONNECT2AIR Wlan AP-600RP-USB No Warranty END of Terms and Conditions
Related manuals
Manual 6 pages 5.71 Kb

AP-600RP-USB specifications

The Fujitsu AP-600RP-USB is a leading-edge device designed to cater to the needs of modern businesses and home offices alike. Equipped with powerful technologies and innovative features, this device stands out in its category for providing optimal performance and reliability.

One of the main features of the AP-600RP-USB is its exceptional processing capability. It is powered by a high-performance processor that ensures swift handling of tasks, making it ideal for environments that demand quick data processing and multitasking efficiency. The device is engineered to support various applications, making it a versatile choice for users across different sectors.

Another significant characteristic of the Fujitsu AP-600RP-USB is its ergonomic design. This well-thought-out device is compact and lightweight, facilitating easy placement and transport. It is designed for comfort, ensuring users can operate the device for extended periods without experiencing strain. This is particularly beneficial for businesses that value employee well-being while maximizing productivity.

In terms of connectivity, the AP-600RP-USB features a USB interface, allowing for seamless integration with various peripherals. This feature enhances the device's usability, enabling users to connect keyboards, mice, and storage devices and ensuring a smooth workflow. The inclusion of advanced wireless technologies also allows for easy connections to networks, providing users with the flexibility to work from anywhere within a network range.

Moreover, Fujitsu has incorporated advanced energy-efficient technologies into the AP-600RP-USB, significantly reducing power consumption while maintaining high performance. This not only contributes to lower operational costs for businesses but also aligns with global efforts towards sustainability and energy conservation.

Security is another crucial aspect of this device. The AP-600RP-USB includes robust security features, ensuring that sensitive data remains protected against unauthorized access. This makes it an excellent choice for organizations looking to safeguard their information in an increasingly digital workspace.

In summary, the Fujitsu AP-600RP-USB stands out for its powerful processing capabilities, ergonomic design, versatile connectivity options, energy efficiency, and strong security features. Whether for a corporate setting or a home office, it is designed to deliver an excellent user experience, making it an investment that promises reliability and performance in today’s fast-paced world.
Top Page Image Contents