Fujitsu AP-600RP-USB manual Primary Setup

Page 31

CONNECT2AIR™ WLAN AP-600RP-USB

Page 30 / 62

8.4Primary Setup

These core options are essential to enable the AP to work properly. The available settings and the interface depend on the WAN type. Choose the correct WAN type before you start.

8.4.1 LAN IP Settings

Do not change the IP address of the AccessPoint unless you have adapted the settings on the DHCP server. Otherwise all clients retrieving their IP address from the AP will loose their connection and will not be reconnected. Changing the IP address will cause a dis- connect from the AP after pressing Save.

•

•

•

•

LAN IP Address Type:

Two selections are provided. If you plan to use any external DHCP server, first enter the settings on the DHCP server page and disable the default DHCP sever, then return to this page and select Dynamic. Otherwise set the LAN address to Static and make sure the IP address is in the range of the DHCP server in which the default DHCP server is usually enabled.

LAN IP Address:

The local IP address of this device. The computers in your network must use this LAN IP address as their default gateway.

Subnet Mask:

Defines the size of the subnet mask range. 255.255.255.0 (default) permits an address range from 192.168.1.1 to 192.168.1.254, for example. This means that the first three segments must always be identical and that the last segment in the range from 1–254 is freely selectable.

Gateway:

Optional. For connections to a different network (e.g., Internet over DSL), the gateway defines the first point of entry for the AccessPoint. No entry is required – entering a gateway address would define an alternative path.

8.4.2 DHCP Server Settings

The settings for a TCP/IP environment include host IP, subnet mask, gateway, and DNS configurations. It is not easy to manually configure all the computers and devices in your network. Fortunately, the DHCP server provides a rather simple approach to handling all of these settings. This product supports the function of the DHCP server. If you enable the DHCP server and configure your computers as “automatic IP allocation” mode, the clients will automatically load the proper TCP/IP settings from the AP when the computer is pow-

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Page Technical Support AP-600RP-USBFCC RF Radiation Exposure Statement FCC InformationFederal Communications Commission FCC Statement CE Declaration of ConformityWlan Overview ContentAppendix a Licensing Information Five steps to success IntroductionDetermine your network knowledge Prepare your PCs and devices to connect to the AccessPointInstall and configure the AccessPoint Install additional features for example, a printer serverIncluded in delivery Functions and FeaturesIeee Standards Wireless Network FundamentalsAd-hoc Mode Peer-to-Peer Workgroup Wlan OverviewInfrastructure Mode Service Set Identification SsidFront Panel Hardware InstallationLED indicators Reset switchProcedure for Hardware Installation Network Basics Network SettingsNetwork Settings Client Network SettingsConfiguration of your Wireless Client Check the Connection Configuration Examples Installation Note Connecting the devices to the AP-600RP-USBAP-600RP-USB with Adsl Router AP-600RP-USB AP-600RP-USB with Adsl Router advancedAP-600RP-USB with Adsl Modem AP-600RP-USB with Cable Modem AP-600RP-USB Floor Two AP-600RP-USB in repetition mode WDSInstall AP Start-up Tool Software InstallationStart-up and Log Accesspoint ConfigurationSystem Status Wizard How to connect to your Internet Service Provider ISPStatic IP Address PPP over Ethernet e.g. Adsl connection Dynamic IP AddressPptp Without an ISP L2TPBand modulation type Wireless Settings Country / RegionWireless network ID Ssid Turbo mode / NitroTM modeWEP keys 1, 2, 3 Wired Equivalent Privacy WEP SecurityPrimary Setup Client List IP Pool Starting / Ending AddressNetmask Lease Time minutesAddress Reservation DNS SettingsWAN Type Configuration / Connection to the Internet ISP Wireless Settings Country / Region Wlan Security AuthenticationEncryption Security begins when Changing the Standard Password Wireless Security SettingsApplication Wired Equivalent Privacy WEP SettingsWPA Enterprise Mode Wi-Fi Protected Access WPAWPA for Soho applications 802.1x and Radius Server IeeeRadius Server General access mode Access Control ListDdns Dynamic DNS User-specific access listExample configuration of a publicly accessible WEBcam Parametrization of the Ddns client in the AccessPointRelease of the route in the virtual server 16 WDS Tips for configuring a WDSExample Static IP address Virtual Server Advanced SettingsApplication Increased firewall protection by closing the ports FirewallAdd Firewall Rule Firewall configurationCONNECT2AIR Wlan AP-600RP-USB Requirements Example of a firewall configurationPC 2 in the Internet 192.35.35.10 with destination AP-600RP CONNECT2AIR Wlan AP-600RP-USB 4 DMZ Time ZoneFirmware Upgrade Administrator ToolboxToolbox Configuration on Windows 2000/XP Platforms Access to USB Printers Through WlanCONNECT2AIR Wlan AP-600RP-USB Press Finish TroubleshootingAvailability of source code Appendix a Licensing InformationCONNECT2AIR Wlan AP-600RP-USB CONNECT2AIR Wlan AP-600RP-USB CONNECT2AIR Wlan AP-600RP-USB No Warranty END of Terms and Conditions
Related manuals
Manual 6 pages 5.71 Kb

AP-600RP-USB specifications

The Fujitsu AP-600RP-USB is a leading-edge device designed to cater to the needs of modern businesses and home offices alike. Equipped with powerful technologies and innovative features, this device stands out in its category for providing optimal performance and reliability.

One of the main features of the AP-600RP-USB is its exceptional processing capability. It is powered by a high-performance processor that ensures swift handling of tasks, making it ideal for environments that demand quick data processing and multitasking efficiency. The device is engineered to support various applications, making it a versatile choice for users across different sectors.

Another significant characteristic of the Fujitsu AP-600RP-USB is its ergonomic design. This well-thought-out device is compact and lightweight, facilitating easy placement and transport. It is designed for comfort, ensuring users can operate the device for extended periods without experiencing strain. This is particularly beneficial for businesses that value employee well-being while maximizing productivity.

In terms of connectivity, the AP-600RP-USB features a USB interface, allowing for seamless integration with various peripherals. This feature enhances the device's usability, enabling users to connect keyboards, mice, and storage devices and ensuring a smooth workflow. The inclusion of advanced wireless technologies also allows for easy connections to networks, providing users with the flexibility to work from anywhere within a network range.

Moreover, Fujitsu has incorporated advanced energy-efficient technologies into the AP-600RP-USB, significantly reducing power consumption while maintaining high performance. This not only contributes to lower operational costs for businesses but also aligns with global efforts towards sustainability and energy conservation.

Security is another crucial aspect of this device. The AP-600RP-USB includes robust security features, ensuring that sensitive data remains protected against unauthorized access. This makes it an excellent choice for organizations looking to safeguard their information in an increasingly digital workspace.

In summary, the Fujitsu AP-600RP-USB stands out for its powerful processing capabilities, ergonomic design, versatile connectivity options, energy efficiency, and strong security features. Whether for a corporate setting or a home office, it is designed to deliver an excellent user experience, making it an investment that promises reliability and performance in today’s fast-paced world.
Top Page Image Contents