Fujitsu manual Two AP-600RP-USB in repetition mode WDS, AP-600RP-USB Floor

Page 21

CONNECT2AIR™ WLAN AP-600RP-USB

Page 20 / 62

6.5Two AP-600RP-USB in repetition mode (WDS)

 

4

 

3

5

4

 

4

2

1

( 2 ) AP-600RP-USB Floor 1

WAN:

PPP over Ethernet

LAN:

static IP: 192.168.1.254

 

subnet Mask: 255.255.255.0

DHCP

on: 192.168.1.10 - 90

 

GW: 192.168.1.254

 

DNS: auto

SSID:

CONNECT2AIR

Channel: 11 (same as AP 2)

WDS:

MAC addr. of AP-600RP-USB 2

 

listed in the table

( 3 ) AP-600RP-USB Floor 2

WAN:

no ISP

LAN:

static IP: 192.168.1.253

 

subnet Mask: 255.255.255.0

 

GW: 192.168.1.254

DHCP

disabled

SSID:

CONNECT2AIR

Channel: 11 (same as AP 1)

WDS:

MAC addr. of AP-600RP-USB 1

 

listed in the table

( 4 ) Notebook

TCP/IP:

get IP and DNS

 

addresses

 

automatically

SSID:

CONNECT2AIR

Data Rate:

auto

The ADSL Modem (1) does not have to be configured.

Connecting the devices to the AP-600RP-USB:

1555

AP-600RP-USB Floor 1

X

AP-600RP-USB Floor 2

Connect the ADSL Modem to the WAN port of the AP1, otherwise the PPPoE session cannot be established and therefore the Internet service cannot be opened. Additional networking devices like network printers, servers or scanners can be plugged into one of the free LAN ports of the AP1 or AP2 and will be integrated in the IP segment of 192.168.1.X.

Installation Note

In order to have more range, up to 6 AccessPoints can be linked together. This case de- scribes the configuration of linking two APs together where AP1 is the managing one, which initiates the PPPoE session and acts as DHCP server. The SSID and the radio channel must be equal for all APs linked, otherwise no connection can be established. Fur- thermore, every AP has to know its counterpart, therefore a MAC address table is provided to enter the appropriate AccessPoint.

Image 21
Contents Page Technical Support AP-600RP-USBFederal Communications Commission FCC Statement FCC InformationCE Declaration of Conformity FCC RF Radiation Exposure StatementWlan Overview ContentAppendix a Licensing Information Five steps to success IntroductionInstall and configure the AccessPoint Prepare your PCs and devices to connect to the AccessPointInstall additional features for example, a printer server Determine your network knowledgeIncluded in delivery Functions and FeaturesAd-hoc Mode Peer-to-Peer Workgroup Wireless Network FundamentalsWlan Overview Ieee StandardsInfrastructure Mode Service Set Identification SsidLED indicators Hardware InstallationReset switch Front PanelProcedure for Hardware Installation Network Basics Network SettingsClient Network Settings Network SettingsConfiguration of your Wireless Client Check the Connection Configuration Examples Connecting the devices to the AP-600RP-USB Installation NoteAP-600RP-USB with Adsl Router AP-600RP-USB AP-600RP-USB with Adsl Router advancedAP-600RP-USB with Adsl Modem AP-600RP-USB with Cable Modem AP-600RP-USB Floor Two AP-600RP-USB in repetition mode WDSInstall AP Start-up Tool Software InstallationStart-up and Log Accesspoint ConfigurationSystem Status How to connect to your Internet Service Provider ISP WizardStatic IP Address PPP over Ethernet e.g. Adsl connection Dynamic IP AddressPptp Without an ISP L2TPWireless network ID Ssid Wireless Settings Country / RegionTurbo mode / NitroTM mode Band modulation typeWEP keys 1, 2, 3 Wired Equivalent Privacy WEP SecurityPrimary Setup Netmask IP Pool Starting / Ending AddressLease Time minutes Client ListAddress Reservation DNS SettingsWAN Type Configuration / Connection to the Internet ISP Wireless Settings Country / Region Authentication Wlan SecurityEncryption Security begins when Changing the Standard Password Wireless Security SettingsApplication Wired Equivalent Privacy WEP SettingsWi-Fi Protected Access WPA WPA Enterprise ModeWPA for Soho applications 802.1x and Radius Server IeeeRadius Server General access mode Access Control ListExample configuration of a publicly accessible WEBcam User-specific access listParametrization of the Ddns client in the AccessPoint Ddns Dynamic DNSRelease of the route in the virtual server Tips for configuring a WDS 16 WDSExample Static IP address Advanced Settings Virtual ServerApplication Increased firewall protection by closing the ports FirewallAdd Firewall Rule Firewall configurationCONNECT2AIR Wlan AP-600RP-USB Requirements Example of a firewall configurationPC 2 in the Internet 192.35.35.10 with destination AP-600RP CONNECT2AIR Wlan AP-600RP-USB 4 DMZ Time ZoneAdministrator Toolbox Firmware UpgradeToolbox Configuration on Windows 2000/XP Platforms Access to USB Printers Through WlanCONNECT2AIR Wlan AP-600RP-USB Press Finish TroubleshootingAvailability of source code Appendix a Licensing InformationCONNECT2AIR Wlan AP-600RP-USB CONNECT2AIR Wlan AP-600RP-USB CONNECT2AIR Wlan AP-600RP-USB No Warranty END of Terms and Conditions
Related manuals
Manual 6 pages 5.71 Kb

AP-600RP-USB specifications

The Fujitsu AP-600RP-USB is a leading-edge device designed to cater to the needs of modern businesses and home offices alike. Equipped with powerful technologies and innovative features, this device stands out in its category for providing optimal performance and reliability.

One of the main features of the AP-600RP-USB is its exceptional processing capability. It is powered by a high-performance processor that ensures swift handling of tasks, making it ideal for environments that demand quick data processing and multitasking efficiency. The device is engineered to support various applications, making it a versatile choice for users across different sectors.

Another significant characteristic of the Fujitsu AP-600RP-USB is its ergonomic design. This well-thought-out device is compact and lightweight, facilitating easy placement and transport. It is designed for comfort, ensuring users can operate the device for extended periods without experiencing strain. This is particularly beneficial for businesses that value employee well-being while maximizing productivity.

In terms of connectivity, the AP-600RP-USB features a USB interface, allowing for seamless integration with various peripherals. This feature enhances the device's usability, enabling users to connect keyboards, mice, and storage devices and ensuring a smooth workflow. The inclusion of advanced wireless technologies also allows for easy connections to networks, providing users with the flexibility to work from anywhere within a network range.

Moreover, Fujitsu has incorporated advanced energy-efficient technologies into the AP-600RP-USB, significantly reducing power consumption while maintaining high performance. This not only contributes to lower operational costs for businesses but also aligns with global efforts towards sustainability and energy conservation.

Security is another crucial aspect of this device. The AP-600RP-USB includes robust security features, ensuring that sensitive data remains protected against unauthorized access. This makes it an excellent choice for organizations looking to safeguard their information in an increasingly digital workspace.

In summary, the Fujitsu AP-600RP-USB stands out for its powerful processing capabilities, ergonomic design, versatile connectivity options, energy efficiency, and strong security features. Whether for a corporate setting or a home office, it is designed to deliver an excellent user experience, making it an investment that promises reliability and performance in today’s fast-paced world.