Features and Controls

The main features and controls that you use to operate the Point 1600 pen tablet are described briefly below. Use of these features and controls is described in detail later in this manual. (Features called out in Figure 1-1 and Figure 1-2 which are not listed here are also described later in this manual.)

•Suspend/Resume Button

Allows you to suspend or resume system operation or turn the pen tablet on or off depending on how your system is configured.

•Status LEDs

Indicate system power state, battery state, and hard disk drive access.

•Pen and Pen Holder

The pen is the main input device that you use to enter data and run programs. The pen should be stored in the pen holder while not in use.

•Hotpads

Tap on the hotpads to adjust speaker volume, display contrast and brightness, to perform a right-mouse-button click, or select the display device.

•DC Power Input

Allows you to attach an external power source to power the pen tablet and charge the battery pack.

•Keyboard/Mouse Port

Allows you to connect the Fujitsu keyboard or a PS/2-style mouse. (Most PS/2-style keyboards can be connected successfully.)

•Optional Wireless LAN Adapter or Built-In Modem

Your system may be equipped with an optional wireless LAN adapter, in which case the antenna (shown) may be present, or an optional built-in modem, in which case an RJ-11 jack (not shown) is present in this location.

•Battery Pack

The battery pack on the Point 1600 pen tablet can be charged in the pen tablet or can be removed from the pen tablet and charged in an external battery charger (sold separately).

•Hard Disk Drive

The Point 1600 pen tablet is equipped with a built-in hard disk drive.

Features and Controls

1-3