Fujitsu 1600 manual Charging the Battery Pack While Installed in the Pen Tablet

Page 25

Charging the Battery Pack (While Installed in the Pen Tablet)

The Point 1600 battery pack can be charged while it is installed in the Point 1600 pen tablet. To charge the battery pack,

1.Look at the Low-Battery LED while the pen tablet is disconnected from external power to determine the battery pack charge level before you begin charging the battery pack. Table 1-1 on page 1-5 shows the battery pack charge level represented by the Low-Battery LED. The lower the battery level, the longer the battery pack will require for recharging.

2.Connect the pen tablet to an external power source. The Charge LED flashes once when external power is initially connected. The Charge LED will then indicate whether the charge level is above or below 90% as discussed in Table 1-1 on page 1-5. (Note that external power can be provided by a source such as an AC adapter or a connectivity peripheral that provides DC power.)

If the battery pack charge is below 90%, the battery pack charges in fast charge mode. If the battery pack charge is 90% or higher, the battery pack charges in slow charge mode. (This protects the battery pack from being overcharged.)

If fully discharged, the battery pack recharges to 90% in about 90 minutes. (Charging may take longer if peripherals are attached.) You can use the pen tablet, suspend system operation, or shut down the system, without interrupting the charging process. Also, note that there is no “memory effect”. You can begin charging the battery pack at any charge level.

Charging the Battery Pack (While Installed in the Pen Tablet)

2-11

Image 25

Contents Page Page UL Notices Agency ComplianceAddress Patrick Henry Drive Santa Clara, CA Telephone FCC NoticesTable of Contents Appendix a Agency Notices Getting Started Point 1600 Pen Tablet Features FrontPoint 1600 Pen Tablet Features Back Features and Controls Status LEDs MICLED Included with the Point 1600 Pen Tablet FMWDS3 Optional AccessoriesConnectivity Peripherals System Power States Using the Point 1600 Pen TabletUsing the Point 1600 Pen Tablet Low Battery Pack Conditions Low Battery Pack ConditionsPower On/Off Suspend/Resume Button ConfigurationNormal Resume OnlyStarting or Resuming the System Suspending the System Other Suspend/Resume Issues Shutting Down the System Using the PenPoint 1600 Pen and Tether To double-click an object quickly, or double-tap, onEnsuring Pen Accuracy Using HotpadsCharging the Battery Pack While Installed in the Pen Tablet Removing and Installing the Battery Pack Removing the Battery Pack Conserving Battery PowerPoint 1600 Pen Tablet Connectors Top Using Connectors and Peripheral InterfacesPoint 1600 Pen Tablet Connectors- Right PC Card Slot Modem Jack optionalUniversal Serial Bus USB Port IrDA PortUsing the Optional Built-In Modem Optional Wireless LAN AdapterSystem Interface Port Floppy Disk Drive PortUsing the Point 1600 Pen Tablet Installing a Screen Protector Care, Maintenance, and TroubleshootingProtecting the Display Screen Care, Maintenance, and Troubleshooting Protecting the Pen Tablet in Harsh Environments Taking Care of the PenAvoiding Overheating Storing the Pen TabletCalibrating the Pen System Will Not Resume or Turn On TroubleshootingDisplay Screen Is Blank or Difficult to Read System Will Not RespondInfrared Data Transfer Is Not Working Audio Volume Is Too Low Wireless LAN Connection Is LostCursor Is Not Tracking Pen Agency Notices 2Appendix DOC Industry Canada Compliance Notices Avis Aux Utilisateurs Du Réseau Téléphonique Canadien Avertissement 6Appendix Index-1 IndexIndex-2