SELECTING THE INPUT SOURCE
You can control the input source the Multimedia Modem Plus uses. If you do not specify the input source, you will not get any output audio signal. Click on the input source name or empty blank next to each one to select it. You have the following input options or combination of options to choose from:
•MIC
•LINE
•CD
•MIC and LINE
•CD and LINE
CONTROLLING VOLUME AND BALANCE
You can control the volume, and balance contribution of each sound type (INPUT SOURCE, GAMES, WAVE, and MIDI). For the audio output signal you control the combined signals from all the inputs using the MASTER control. To control the volume and balance on the Mwave Audio Mixer
Window as follows:
•Drag the volume control slider up or down.
•Drag the balance control slider left or right.
•Click on MUTE to mute a sound source.
SETTING TONE CONTROLS
You can change the tone controls of the audio output signal through changing the treble and bass settings. To control the tone controls on the Mwave Audio Mixer Window:
•Drag the treble control left or right.
•Drag the bass control left or right.
•Click on the empty blank for TONE CONTROL to enable the tone controls.
Page 28 of 47