7.If your operating system restarts without error, proceed to "Updating the MMPM/2 for Multimedia Modem Plus."
If errors occur:
Refer to the documentation that comes with your computer and your existing devices to find an unused setting that you can use for the Multimedia Modem Plus adapter.
If you have a COM port or IRQ identifier conflict, check your computer manual to determine if you have an unused COM port and IRQ identifier pair. After resolving the conflict, run SETUP again to change the settings.
NOTE: If an IRQ assigned to a printer port (LPT1) conflicts with one of the Multimedia Modem Plus IRQ settings, the Multimedia Modem Plus can use the IRQ if a printer is not connected to the port.
When you have successfully completed CONFIGO.EXE, select EXIT to end the program.
When the configuration for OS/2 is complete, shutdown and restart your computer.
Page 16 of 47