MaxLoader User’s Guide
Data can be reloaded into the memory from the file directories that contains previously loaded files. Reload remembers your file location and type (Binary or All Hex) that has been loaded into the buffer.
File / Save
Save the current data in your memory buffer to disk storage by using one of the current supported file formats.
Before saving a file, check the buffer and the file address ranges. The contents of the buffer through the specified range will be written into the new file, completely erasing any existing file with the same name. Before saving to a disk, make sure that no file with the same name exists.
File/ Load Project
A project file that saved by SAVE PROJECT menu is loaded. The project files use the extension (last 3 letters) “.prj.”
File/ Save Project
This feature allows you to create a job description such as “engineer name” and other useful information for records.
It is very useful for future use when you set up all possible environments such as selecting a device, loading a file, and setting other configurations for programming jobs. A job description can be saved as a file name and the same project environment will be ready once you load the same project name.
File Name: A file name can be entered with the 3 letter extension “.prj.”
Author: An engineer’s name [whom creates this project].
Description: A job explanation that you memorize for your future usage. A device number, File name, and checksum number can be entered in the note pad. Other programming menu descriptions, such as configurations can be described.
45