IBM Netcool/OMNIbus Probe for Nortel CNM manual Error messages, Error Description Action

Page 23

Error messages

Table 7 describes the error messages specific to this probe. For information about generic error messages, see the IBM Tivoli Netcool/OMNIbus Probe and Gateway Guide, (SC23-6387).

Table 7. Error messages (1 of 4)

Error	Description	Action

Cannot initialize the	The probe could not initialize	Ensure your CLASSPATH
Orb:	the ORB.	contains the path to the
		Visibroker jar files.

Command_Port Error	There was a problem with	Check that you have specified the
occurred	command port functionality.	command port correctly. Check
Command_Port Failed		the connection between the probe
Command_Port Failed		and the command port.
to get		and the command port.
to get
CommandPortLimit
property - using 10
Command_Port Failed
to get property
CommandPort
Command_Port Failed
to open listening
socket, shutting down
Thread!
Command_Port Failed
to send probewatch
message!
Command_Port host
Failed to close
command socket
Command_Port host
Failed to get socket
IO
Command_Port host
Failed to read
command
Command_Port Thread
shutting down due to
error!
NetcoolIRPManager:
Failed to
acknowledge_alarms()
NetcoolIRPManager:
Failed to
Unacknowledge_
alarms()

Probe for Nortel CNM 17

Image 23

Contents Reference Guide Netcool/OMNIbus Probe for Nortel CNMPage Contents Iv Netcool/OMNIbus Probe for Nortel CNM Reference Guide Document Publication Comments Version Date Document controlVi Netcool/OMNIbus Probe for Nortel CNM Reference Guide Probe for Nortel CNM Summary SummaryUpdating the rules file Basic configurationInstallation requirements Supported platformsData acquisition Connecting to the Corba interfaceRunning multiple probes TimeoutStatus checking Retrieving objectsElement Token Filtering notifications and alarmsCommand Description Command line interfaceAllows you to clear an alarm in the 3GPP2 interface Same format as the AlarmFilterNotifications and alarms on Allows you to unacknowledge an alarmPeer-to-Peer failover functionality Example property file settings for peer-to-peer failoverInternationalization support Example multi-byte character set configuration on SolarisProperty name Command line option Description Properties and command line optionsDefault is 32.303 Using the Command Line Interface CLIInformation on CLI, see Command line Default is 32.363Timeout Password required with the UsernameUsing the ncogcrypt utility. For He default is falseForever open Time in minutes that the Notificiation IRPSession remains open to connections. This Is used by the 3GPP serverElement name Element description ElementsName of the service provider Dynamically and its content is dependent on the IRPCause of the alarm Name of the user who uses the serviceError Description Action Error messagesServer Server is running correctly There is a problem with Refer to your CorbaCorba interface Documentation Probe cannot connect to Check that the Nortel CNMAlarmIRP object using Alarm this is probably because Server is running correctlyAlarm is not in a format that Probe can understand Timeout property has not Check the value for the TimeoutProbe has failed to take Check the value for Probe found a problem Check the values set forWhile connecting to There was a problem with Check that the Nortel CNMProbeWatch message Description Triggers/causes ProbeWatch messagesProbe has failed to get AlarmirpFile property Probe could not login to Incorrect usernamePassword given in the properties Listen for commandsProbe encountered an Contact the IBM support Probe could not get new Probe failed to get the alarmUnexpected fatal error Commands on the specified Receive commandsNetcool/OMNIbus Probe for Nortel CNM Reference Guide Appendix A. Notices JBFA/SOM1 AIX AIX 5L TrademarksNetcool/OMNIbus Probe for Nortel CNM Reference Guide