IBM 3270 manual Yes

Remove the card from the PCI slot and reinstall vacant PCI slot according to the “Installation In on page 9.

c. If the problem persists, contact technical support Appendix A on page 23).

5.Did anX appear beside the picture of the coax cab diagnostic display?

No

Continue

at

step

7.

Yes

Continue

at

step

6.

6. Check

the

following

to

isolate

the problem. Run the d

program

after

each

step

to

see

if the problem

is

a. Make sure that the cable is firmly attached to

connector.

b. Make

sure

that

the cable

connecting

the card

to

unit

is

good.

c. Make

sure

the

control

unit

port

is

active.

d. If the problem persists, contact technical support Appendix A on page 23).

7.Did “Cannot LoadVXD327ð.VXD” message appear on the diagnostic display?

No	Continue			at	step		9.
Yes	Continue			at	step		8.
8. Check	the		following			to	isolate		the	problem. Run	the d
program		to	see		if	the		problem	is	resolved.
a. Make		sure		that		VXD327ðthe file.VXD is in				the same	director
whereDIAG327ð.EXE						is	being runVXD327ð. File .VXD is in				the
DIAG		directory				on	the	3270	PCI	CD-ROM.

b. If the problem still persists, have the system u (see Appendix A on page 23).

9.Did “Cannot LoadIBM327ð.SYS” message appear on the diagnostic display?

No Continue at step 11 on page 17.

16 3270 Emulation PCI Adapter User’s Guide