Brief instructions on installing system board
► Should no suitable connection field be provided in the case, then you must install the connection field (1) provided.
Ensure the plate is aligned properly so that the connections are suitable for the system board later.
► Set the system board on the edge on which the connection field is located (2) and then insert the board in the
case (3).
Make sure that spacers in the housing are only mounted at points at which there are mounting holes in the system board.
► Fasten the system board with the screws.
►Connect the plugs for the power supply, control panel and drives to the corresponding connections on the system board.
Driver installation
►Install the drivers for the chipset. You may find the driver on the "ServerStart” and “ServerSupport” CDs..
6 | D1859 (Econel 50) |