Add-on modules / Upgrading
Exit
Even when you have run down the device, parts of the device (e.g. memory modules, PCI extension boards) are still energised.
Installing and removing processors
Technical data
●Intel Pentium 4 with 800 MHz front side bus (FSB) in the LGA775 design.
●A current list of the processors supported by this system board is available in the service documentation.
Installing processor with heat sink
! | Never touch the underside of the processor. Even minor soiling such as grease from the | |
skin can impair the processor's operation or destroy the processor. | ||
|
Place the processor in the socket with extreme care, as the spring contacts of the socket are very delicate and must not be bent.
► Remove the heat sink.
2 |
1 |
►Press down the lever (1) and unhook it.
►Fold up the frame.
►Remove the old processor (2) from the socket.
18 | D1859 (Econel 50) |