Jumper settings
The positions of the jumpers are shown on page "Cover".
Setting via control-panel plug connector
A | 1 | |||
| 2 | |||
B |
|
| 1 | |
|
| 2 | ||
1
C 
2
Pin pair A inserted =
Skipping system and BIOS Setup password
Pin pair B inserted = System BIOS recovery
Pin pair C inserted = factory setting
i | Please pay attention on the exact position of the pin pairs! |
Skipping system and BIOS Setup password - pinpair A
Pinpair A enables skipping the system and BIOS Setup password.
Inserted System and BIOS Setup password are skipped when the device is switched on and may be changed.
Not inserted System and BIOS Setup password must be entered when the device is switched on.
Recovering System BIOS - pinpair B
Pinpair B enables recovery of the old system BIOS after an attempt to update has failed. To restore the old BIOS you need a Flash BIOS Diskette (see "BIOS update" chapter).
Inserted The System BIOS executes from floppy drive A: and the inserted
Not inserted Normal operation (default setting).
17 | D1859 (Econel 50) |