Fujitsu D1859 technical manual Bios Recovery Recovering System Bios

Page 33

Add-on modules / Upgrading

BIOS Recovery - Recovering System BIOS

i	All BIOS settings are reset to the default values.

►Open the casing as described in the operating manual.

►On the system board set the jumper to the appropriate setting to restore the system BIOS (see chapter "Jumper settings").

►Close the casing as described in the operating manual.

►Insert a BIOS update floppy disk and start the server.

►Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you hear the signal sequence "short-short- long- long- long" and the diskette access indicator is dark. This can take a few minutes.

►Open the casing as described in the operating manual.

►Restore the switch or jumper settings.

►Close the casing as described in the operating manual.

►Remove the floppy disk from the drive.

►Start the server and invoke BIOS Setup.

►Select the menu item Reset Configuration in the menu Advanced and change the setting to Yes.

►Save the change and terminate BIOS Setup.

The BIOS recovery has now been completed. The system restarts.

i	Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"
	("ServerBooks" CD).

D1859 (Econel 50)

27

Image 33

Contents English Reliability2Are there Page Page Contents Page System board D1859 Notational conventionsAdditional information Information about boards Important notesOnboard features List of featuresSpecial onboard features Internal portsExternal ports Brief instructions on installing system board Prior to installationInstallation Driver installation Interfaces and connectors External ports LAN connectorHard disk connection Internal ports and connectorsPin assignment of internal ports Front panelSerial ATA IDE/ATA interface Fan USB dual channelFloppy interface Intrusion LCD displayAdditional power supply ATX12 Power supply BTXPower supply control Setting via control-panel plug connector Jumper settingsSkipping system and Bios Setup password pinpair a Recovering System Bios pinpair BInstalling processor with heat sink Installing and removing processorsTechnical data Add-on modules / UpgradingAdd-on modules / Upgrading Mounting heat sink Upgrading main memory Removing a memory module Installing a memory moduleAdding PCI cards Adding PCI Express cardsPCI bus interrupts Selecting correct PCI slot Monofunctional expansions cardsUSB Slot PCI On board controllerUSB PCI Slot SMBus PCIeReplacing the lithium battery When should a Bios update be carried out? Bios updateBios Recovery Recovering System Bios Microcode Update What is a microcode update?When should a microcode update be carried out? Bios version System board Revision and Bios VersionAnnex System board RevisionLoadability for connections and fuses Electrical PropertiesBios update for installed CPU failed Error messagesIncorrect Drive a run Setup Incorrect Drive B run Setup Keyboard error nn nn Stuck Key System Management Configuration changed or Problem occurred Glossary Information on this document