IBM 6274, 2283 manual Connecting cables, USB connectors

Page 22

•Avoid the use of extension cords. Whenever possible, plug the computer power cord directly into an electrical outlet.

•Keep power cords and cables neatly routed away from walkways and other areas where they might be accidentally dislodged.

Connecting cables

Read the following before connecting cables:

•Connect all device cables before plugging any power cords into an electrical outlet.

•Connect the power adapter cord to the computer 10 (see Figure 1 on page 9) and to the other devices before plugging them into an electrical outlet.

Important

If your computer is being connected to an Ethernet network, a Category 5 Ethernet cable must be used for operation of the system within FCC Class A limits.

USB connectors

There are six USB connectors on your computer (see Figure 1 on page 9): four at the rear 9 and two on the top side 5 of the monitor.

If your computer comes with a USB keyboard and mouse, plug them into the USB ports at the rear of the computer near the power cord connector. These cables can be relocated to other USB connectors at a later time if desired.

If your computer comes with an IBM Dual Wireless Receiver, plug the receiver into one of the USB connectors at the rear of the computer. The Rapid Access Wireless Keyboard and the ScrollPoint Wireless Mouse operate with this receiver.

Notes:

1.Cable connectors from USB devices are keyed so that they cannot be connected incorrectly.

2.Do not place the IBM Dual Wireless Receiver on top of the power supply.

8User Guide

Page 21 Page 23
Image 22
Page 21 Page 23
Contents IBM Page Contents Iv User Guide Index Vi User Guide Safety notices To connect To disconnectLithium battery notice Connexion DéconnexionModem safety information Consignes de sécurité relatives au modemLaser compliance statement Remove the drive coversSafety notices Xii User Guide About this book Conventions used in this bookAccess IBM Related informationProduct overview Identifying your computerMicroprocessor Hardware featuresMemory Power System management featuresKeyboard and mouse features Security featuresSoftware IBM preinstalled softwareAccess IBM Additional softwareSelecting a location for your computer Setting up your computerBefore you begin Comfort Arranging your workspaceGlare and lighting Air circulation Electrical outlets and cable lengthsConnecting cables USB connectorsAudio connectors Other connectorsStarting the computer Controls and status indicators Operating and caring for your computerStarting your computer Shutting down the computer Using the Rapid Access keyboardClick Shut Down... or Turn off computer in Windows XP Customizing a Rapid Access Button Rapid Access Wireless keyboard and mouseOperating and caring for your computer Using the IBM ScrollPoint mouse Accessing the optical drive Using an optical drive Handling a discInserting and removing a disc Controlling volume Using video featuresUsing audio features Video device driversUsing power-management features Recording and playing back soundUsing the power button Using the Windows Start menuUsing the Standby button on the keyboard Setting power schemesLocking the cover Using security featuresLocking the keyboard Basics Cleaning your computer and keyboardTaking care of your computer Monitor and screenOperating and caring for your computer Moving your computer Using the IBM Setup Utility program Starting and using the IBM Setup Utility programViewing and changing settings Main Devices Startup Advanced Security Power ExitUsing passwords Exiting from the IBM Setup Utility programUser password Using Security Profile by Device Administrator passwordSetting, changing, and deleting a password Select Security Profile by Device and press EnterStartup sequence Other settings in the IBM Setup Utility programChanging the startup sequence User Guide Installing options Handling static-sensitive devicesAvailable options Backing up configuration settingsTools required Component locations System boardDisconnecting cables Removing the rear cover Installing an adapter Removing the hard disk drive Installing memory Replace the hard disk drive Replace the rear cover Removing the optical drive Troubleshooting Is an error message displayed? Troubleshooting procedureIs the error message in this table? Power-on self-test Post Post error codesCode Description Action Code Description Action Device troubleshooting charts Problem type Go to Audio problems Symptom ActionOptical drive problems DVD disc problems Display/monitor problems General problemsIntermittent problems Rapid Access IIIe Keyboard problems Rapid Access Wireless Keyboard problems ScrollPoint III Mouse problems ScrollPoint Wireless Mouse problems Memory problems Modem problems Symptom Action AT&F Optional-device problems Universal Serial Bus USB problems Software problemsIBM Enhanced Diagnostics Creating an IBM Enhanced Diagnostics diskette Select Downloadable filesReplacing the battery Running the IBM Enhanced Diagnostics programTo run diagnostics from the Product Recovery CD or program Troubleshooting User Guide Getting information Getting information, help, and serviceUsing the World Wide Web Getting information by faxUsing the documentation and diagnostic programs Getting help and serviceCalling for service Getting information, help, and service Other services Country Telephone numberPurchasing additional services User Guide General notices Processing date data TrademarksIndex User Guide Volume Wireless Keyboard 8, 14 mouse 8, 14 receiver 8 User Guide 23P1170 IBM@

2283, 6274 specifications

The IBM 2283 and 6274, pivotal components of the IBM family of products, represent a significant leap in technological advancement and efficiency in enterprise computing. Designed with the modern business environment in mind, these models are crafted to address a variety of data processing needs, making them indispensable to organizations striving for operational efficiency.

The IBM 2283 is primarily recognized as a high-performance printer that caters to the printing demands of large enterprises. One of its notable features is the ability to produce large volumes of high-quality printouts, which is essential for businesses that require meticulous documentation and reporting. With its fast printing capabilities, the 2283 is engineered to enhance productivity, allowing users to obtain results quickly without sacrificing quality.

In terms of technology, the IBM 2283 employs advanced printing techniques, such as laser technology, which ensures precise imaging and sharp text output. Additionally, the printer supports various media types and sizes, making it versatile for different business applications. Its connectivity options allow for seamless integration with existing systems and workflows, enabling users to send print jobs directly from their computers, thereby simplifying the printing process.

On the other hand, the IBM 6274 model takes data processing a notch higher with its robust set of features aimed at enhancing data analysis and reporting. This model focuses on delivering powerful processing capabilities, making it suitable for organizations that need to handle complex data sets efficiently. The 6274 is equipped with advanced algorithms to facilitate advanced analytics, offering businesses insights that drive decision-making.

One of the standout characteristics of the IBM 6274 is its support for multiple connectivity options, including Ethernet and wireless communication, which offers flexibility in accessing and processing data. Furthermore, with its user-friendly interface, the 6274 ensures that users can easily navigate through its functionalities without extensive training.

Both the IBM 2283 and 6274 are characterized by their reliability and durability, ensuring long-term use in demanding environments. They are designed with energy efficiency in mind, aligning with the modern emphasis on sustainability in technology.

In summary, the IBM 2283 and 6274 models embody the fusion of performance, versatility, and reliability. They are equipped with cutting-edge technologies that cater to the needs of contemporary businesses, making them vital tools for enhancing productivity and efficiency in a fast-paced corporate landscape.
Top Page Image Contents