| Removal and Replacement Procedures |
Fiscal memory card
Attention: The memory card is permanently bonded to the fiscal interface assembly. Removal of all FRUs from the fiscal interface housing is required before replacing the memory card.
1.Remove the fiscal interface assembly from the printer (see ªFiscal interface assemblyº on page 6).
2.From the fiscal interface housing:
a.Remove the fiscal processor card (see ªFiscal processor cardº on page 11).
b.Remove the CompactFlash (see ªCompactFlash card assemblyº on page 12).
c.Remove fiscal interface card (see, ªFiscal interface cardº on page 14).
d.Remove the keylock.
Figure 11. Fiscal Memory Card
3.Using a new fiscal interface housing with the memory card, reassemble the fiscal interface assembly.
4.Give the fiscal interface housing, with the memory card, to the proper authority.
5.After installing the assembled fiscal interface housing into the printer, place the printer into service according to the local fiscal regulations.
Chapter 2. SureMark printer service manual supplement 15