IBM 4610 System log descriptions, B2 Terminal hardware errors, B3 terminal events, Data Number

(GY27-0366) April 3, 2003

Chapter 4. System log descriptions

These tables contain information about the Bx/Sxxx/Ennn entry in system messages. For additional information, see ªSystem Log Descriptionsº in theIBM 4690 Store System: Messages Guide.

B2 - Terminal hardware errors

Table 2. B2 - Terminal Hardware Errors

Source(s)	Event		System	Unique	Alert		Explanation
			Message	Data	Number
090	30		W332	See Note	N/A		An error occurred in the fiscal unit on power up.
090	32		W332	See Note	N/A		A power line disturbance (PLD) error occurred during
							command execution in the fiscal unit.
090	33		W332	See Note	N/A		An error occurred while processing a fiscal command.
090	34		W332	See Note	N/A		An error is detected while trying to write to the fiscal memory.
090	36		W332	See Note	N/A		A hardware error has occurred in the fiscal unit.
090	37		W332	See Note	N/A		An incorrect password was entered when attempting to
							access the fiscal unit.
Note: Unique Data Format:
DEVICE ID:	xx			COMMAND:	xxxx
PRINTER STATUS:		xxxxxx		FISCAL STATUS:		xxxxxx
RETURN CODE: xxxxxxxx

B3 - terminal events

Table 3. B3 - Terminal Events

Source	Event			System	Unique	Alert		Explanation
				Message	Data	Number
090	043			W332	See Note	N/A		The fiscal unit memory is full.
090	044			W332	See Note	N/A		The J4 (CE) jumper is required to continue.
090	045			W332	See Note	N/A		More than 199 repair actions have been performed on the
								fiscal unit.
Note: Unique Data Format:
DEVICE ID:		xx			COMMAND:	xxxx
PRINTER STATUS:			xxxxxx		FISCAL STATUS:		xxxxxx
RETURN CODE:		xxxxxxxx

© Copyright IBM Corp. 2002, 2003 23