Fujitsu 5000 Location of expansion Cards Applicable Expansion Cards, Installing an Expansion Card

■Location of expansion Cards

■Applicable Expansion Cards

This PC accommodates a PCI expansion card.

The PCI1 slot holds an expansion card with a maximum length of 176 mm (half size) and the PC2 slot holds an expansion card with a maximum length of 120 mm (half size).

To run the expansion card, the generally called resource necessary for operation must be assured.

The floppy disk drive and hard disk drive inside the PC use pathes predetermined according to each component to swap data with the CPU, memory module, and so on. As the types of these paths, the I/O port addresses, DMA channel, and intervention required (IRQ) are provided, which are generally called “resource”.

The Plug-and-Play expansion card for the PCI bus automatically configures the resource when it is installed.

■Installing an Expansion Card

1Unplug the PC.

2Remove the upper cover.

50