5Fill out [Computer name], [Administrator password], and [Reenter password], and click [Next].
[Setting up network] appears.
To set up the network, ask your network administrator to check the setup after completing the setup, and set it up for your operating environment.
6Click [Standard setting] and [Next].
Point
With [Standard setting], the following network components are installed.
●Microsoft Network Client
●Microsoft Network File and Printer Share
●Internet Protocol (TCP/IP)
[Work group or domain name] appears.
7Click [This computer is not on the network, or it is connected to the network without domain], and click [Next].
[Windows 2000 has been successfully installed] appears.
8Click [Restart], or wait 15 seconds to restart the computer. [Starting the Network Identification Wizard] appears.
Important
Do not click [Back] on this screen.
To correct the setting, complete the setup, and then correct the setting.
9Click [Next].
[Computer user] appears.
10Click [User for this computer...] and [Next].
24