Fujitsu BX600 manual Syntax Show mac-addr-table macaddr all, Display Message

Page 146

Management Commands

Command Reference

Syntax

storm-control flowcontrol no storm-control flowcontrol

no - This command disables 802.3x flow control for the specific interface.

Default Setting

Disabled

Command Mode

Interface Config

7.4.2L2 MAC Address and Multicast Forwarding Database Tables

7.4.2.1show mac-addr-table

This command displays the forwarding database entries. If the command is entered with no parameter, the entire table is displayed. This is the same as entering the optional all parameter. Alternatively, the administrator can enter a MAC Address to display the table entry for the requested MAC address and all entries following the requested MAC address.

Syntax

show mac-addr-table [{<macaddr> all}]

<macaddr> - enter a MAC Address to display the table entry for the requested MAC address.

all – this command displays the entire table.

Default Setting

None

Command Mode

Privileged Exec

Display Message

Mac Address: A unicast MAC address for which the IBP has forwarding and/or filtering

Image 146

Contents Primergy BX600 Blade Server Systems Primergy BX600 Blade Server Systems Comments… Suggestions… Corrections… Page Contents Page Page Page Important Notes 1Information About Boards2Compliance Statements Industry Canada Class aLVD Taiwan Bsmi Class a Australia AS/NZS 3548 1995 Class a Features of the IBP Module Head of Line BlockingBack Pressure Support MAC Address Supported Features MAC Address Capacity SupportFlow Control Support Ieee Jumbo Frames SupportAutomatic Aging for MAC Addresses Layer 2 Features Igmp SnoopingVlan Transparency Supported Features Port SecurityPort Group Support Port Backup SupportBootP and Dhcp Clients Failover Propogation SupportVarious Files of Management Operation IBP Module Management FeaturesSave Configuration as file Duplication of Management fileCommand Line Interface Snmp Alarms and Trap LogsConfiguration File Download and Upload Snmp Version 1,Version 2, and VersionLocked Port Support Security FeaturePort Based Authentication Radius ClientDescription of Hardware Internal PortsCompliance Statements Important Notes Primergy GbE Switch Blade 30/12 Internal Ports List Primergy BX620Port LEDs Features and BenefitsStatus of LEDs System LEDPerformance ManagementNotational Conventions Target Group Electrical data Technical DataDimensions National and international standardsEnvironmental conditions Network Planning Introduction to IBPConnecting to 1000BASE-T Devices Making Network ConnectionsCable Testing for Existing Category 5 Cable 1000BASE-T Cable RequirementsAdjusting Existing Category 5 Cabling for 1000BASE-T 1000BASE-T Pin AssignmentsUnpacking the IBP Module Package ContentsOverview Connecting the IBP Module Mount the IBP ModuleSelect 2 Console Redirection Switch Blade Start up and Configuration the IBP Module Port Default SettingsConfiguring the Terminal Under Properties, select VT100 for Emulation modeBooting Device Software Download Erasing the Device ConfigurationBoot Image Download Operation Code CLI Software Download Through Tftp Server System Image DownloadTftp Main Menu Web-Based Management Interface Web-Based Management Interface Main Menu Configurable DataCommand Buttons Selection CriteriaConfiguring Port Configuration Non-Configurable DataCompliance Statements Important Notes Viewing Port Group Information Configurable Data Compliance Statements Important Notes Viewing Management Vlan Information Managing Port Backup Configuring Port Backup Configuration Viewing Port Backup Status Refresh Updates the information on Compliance Statements Important Notes Viewing Panel Description Page Configurable Data Configuring Inband Administration Terminal interface via the EIA-232 portNon-Configurable Data Compliance Statements Important Notes Configuring Telnet Session Page Configurable Data Main Menu Web-Based Management Interface Configuring Serial Port Page Configurable Data Selection Criteria Command Buttons Defining Dhcp Client Configuring Dhcp Restart Configuring Dhcp Client-identifierDefining Snmp Configuring Snmp Community Configuration Configuring Snmp Trap Receiver Configuration Viewing Snmp supported MIBs Main Menu Web-Based Management Interface Command Buttons Viewing Sntp Global Status Non-Configurable Data Configuring Sntp Server Configuration Configurable Data Viewing Sntp Server Status Non-Configurable Data Unknown IPV4Main Menu Web-Based Management Interface Configurable Data Intelligent Blade Panel Module Refresh Refresh the configuration value again Reset the Passwords to Defaults Page Command Buttons Managing System Utilities Panel Reset Command ButtonsReset All Configuration to Defaults Page Command Buttons Overview Web-Based Management Interface Uploading Specific Files from Panel Removing Specific File Copying Running Configuration to Panel Defining Ping FunctionSubmit This will initiate the ping Non-Configurable Data Viewing Radius Statistics Page Non-Configurable Data Viewing Radius Server Statistics Page Selection Criteria Command Buttons Non-Configurable Data Resetting All Radius Statistics Page Command Buttons Configurable Data Command Buttons Non-Configurable Data Overview Web-Based Management Interface Viewing Buffered Log Configuring Command Logger Page Configurable Data Configuring Console Log Viewing Event LogConfiguring Hosts configuration Page Configurable Data Configuring syslog configuration Page Configurable Data Overview Web-Based Management Interface Viewing Login Session Page Non-Configurable Data CLI Mode-based Topology Command Reference Command Buttons Non-Configurable Data CLI Mode-based Topology Command Reference CLI Mode-based Topology Command Reference 104 Intelligent Blade Panel Module 105 Intelligent Blade Panel Module CLI Mode-based Topology Command Reference CLI Mode-based Topology Command Reference Viewing Each Port Summary Statistics Page Selection Criteria Configurable Data Command Buttons Non-Configurable Data CLI Mode-based Topology Command Reference Viewing Access Control Summary Page Non-Configurable Data Command Buttons Non-Configurable Data Defining Access Control User Login Page Selection Criteria Defining Each Port Access Privileges Page Selection Criteria CLI Mode-based Topology Command Reference Managing IP Filter IP Filter Configuration Selection Criteria Defining User Login Selection Criteria Example Ip address ipaddr netmask vlan-id CLI Command FormatCommand Example Clear port-groupValues CLI Mode-based TopologyParameters Network Address Syntax Address Type Format Range IPAddrMacAddr AnnotationsSystem Information and Statistics commands Show running-config Show eventlogShow running-config all scriptname Show sysinfoShow hardware Show systemSystem Information Show version Show loginsession Show interface status slot/port all Device Configuration CommandsInterface Show interface status Show interface counters Show interfaceShow interface slot/port Default Setting Show interface counters detailed slot/port switchport Total Packets Transmitted Octets Total Packets Received Without ErrorsTotal Packets Received with MAC Errors Total Transmited Packets Discards Total Transmit ErrorsTotal Packets Transmitted Successfully Management Commands Command Reference Show interface IBP Interface Interface rangeSpeed-duplex all 10 100 full-duplex half-duplex Speed-duplexSpeed-duplex 10 100 full-duplex half-duplex Full duplex Full duplex half duplex Half duplexNegotiate all no negotiate all NegotiateNegotiate no negotiate Capabilities Storm-control flowcontrol no storm-control flowcontrol DescriptionStorm-control flowcontrol Syntax Show mac-addr-table macaddr all Show mac-address-table igmpsnooping Show mac-address-table multicast Show mac-address-table multicast macaddr vlanid allShow mac-address-table stats Show mac-address-table stats Default SettingShow mac-address-table agetime Default Setting Show mac-address-table agetimeMac-address-table aging-time Management Vlan Show mgmt-vlanMgmt-vlan mgmtVlanName no mgmt-vlan mgmtVlanName Mgmt-vlanMgmt-vlan mgmtVlanName vlan-id no mgmt-vlan mgmtVlanName Show igmpsnooping Igmp Snooping Show Commands Show igmp snoopingConfiguration Commands Igmpsnooping Igmpsnooping portGroupName no igmpsnooping portGroupNameShow lacp Port Channel LacpLacp portGroupName no lacp portGroupName Port Group Show Commands Port-group portGroupName no port-group portGroupNamePort Backup Show Commands Default Setting Command Mode Configuration Commands Port-backupPort-backup portGroupName no port-backup portGroupName Port-backup no port-backup Link State Show CommandsConfiguration Commands Linkstate Linkstate portGroupName no linkstate portGroupNameShow ip redirects Management CommandsNetwork Commands Show ip interface Mtu 1518-9216 no mtu Show ip filter1.4 mtu Ip default-gateway gateway no ip default-gateway Command UsageIp default-gateway Ip addressIp address mgmt-vlan Ip address protocol bootp dhcp vlanID noneIp address protocol Ip filter Ip filter no ip filterSerial Interface Commands Show line console Ip filter ipaddr no ip filter ipaddrLine console BaudratePassword-threshold 0-120 no password-threshold Exec-timeoutPassword-threshold Telnet host port debug line echo Telnet Session CommandsSilent-time Show line vty Line vtyExec-timeout 1-160 no exec-timeout Sessions MaxsessionsMaxsessions 0-5 no maxsessions Telnet sessions no telnet sessions Sessions no sessionsTelnet sessions Telnet maxsessionsTelnet maxsessions 0-5 no maxsessions Telnet exec-timeoutTelnet exec-timeout 1-160 no telnet exec-timeout Snmp Server Commands Show snmp Show telnetShow trapflags Snmp-server location Snmp-server sysnameSnmp-server sysname name Syntax Snmp-server location locSnmp-server community name no snmp-server community name Snmp-server contactSnmp-server community Default Setting Snmp-server community ro rw name Snmp-server host ipaddr name no snmp-server host name Snmp-server enable trapsSnmp-server host No This command disables Multiple User trap Snmp Trap Commands Show snmptrap Snmp trap link-status all no snmp trap link-status all Snmp trap link-statusSnmp trap link-status no snmp trap link-status Snmptrap ipaddr Snmptrap name ipaddrSnmptrap name ipaddr no snmptrap name ipaddr Http commands Show ip http Snmptrap modeSnmptrap mode name ipaddr no snmptrap mode name ipaddr Snmptrap ipaddr name ipaddr ipaddrnewIp javamode Ip javamode no ip javamodeIp http server Ip http portIp http port 1-65535 no ip http port Ip http server no ip http serverIp http secure-server Ip http secure-portIp http secure-port portid no ip http secure-port Ip http secure-server no ip http secure-serverSecure Shell SSH Commands Show ip ssh Ip http secure-protocolIp ssh protocol Ip sshIp ssh no ip ssh Ip ssh maxsessions 0-5 no ip ssh maxsessions Ip ssh timeoutIp ssh maxsessions Ip dhcp client-identifier Ip ssh timeout 1-160 no ip ssh timeoutDhcp Client Commands Ip dhcp restart System Burned In MAC Address Lock lockidentifier Exclusive no lock lockidentifierALL Lock CommandsLockmessage messagestring default LockmessageLockreset Show lockShow logging buffered System Log Management CommandsShow Commands Show logging Show logging hosts Show logging traplogShow logging traplogs Logging buffered no logging buffered Configuration Commands Logging bufferedDisplay Message Index used for deleting Logging console severitylevel 0-7 no logging console Logging buffered wrap no logging buffered wrapLogging console Logging host Logging host hostaddress port severitylevelLogging syslog no logging syslog Logging host reconfigure hostindex hostaddressLogging syslog Logging syslog port portid no logging syslog port Clear logging bufferedScript apply scriptname Script Management CommandsScript apply Script deleteScript show scriptname Script listScript show Configuration Commands Username User Account Management CommandsShow Commands Show users Username username password nopassword no username username Username snmpv3 authenticationUsername snmpv3 encryption Show authentication Security CommandsShow Commands Show users authentication Show authentication users Show dot1xShow dot1x detail Show dot1x statistics Show dot1x statistics slot/portShow dot1x users Show dot1x summaryShow dot1x summary slot/port all Show radius Secret Configured Yes / NoShow radius-servers Radius Accounting Mode Enabled or disabled Show radius accounting statistics ipaddrShow radius statistics ipaddr Secret Configured Yes or NoShow radius statistics Show tacacs Show port-security Show port-security dynamic slot/port Configuration Commands Authentication login Username defaultlogin Possible method values are local, radius, reject, and tacacsUsername login Username login user listname3 Dot1x Configuration Commands 3.1 dot1x initialize 3.2 dot1x default-login3.4 dot1x system-auth-control 3.3 dot1x loginDot1x login user listname Dot1x system-auth-control no dot1x system-auth-control3.5 dot1x user 3.6 dot1x port-control3.7 dot1x max-req 3.9 dot1x re-reauthenticate 3.8 dot1x re-authenticationDot1x re-authentication no dot1x re-authentication Dot1x max-req 1-10 no dot1x max-req3.10 dot1x timeout Radius Configuration Commands Radius accounting mode Radius accounting mode no radius accounting modeRadius-server host Radius-sever keyRadius-server retransmit Retries the maximum number of times Range 1Radius-server msgauth Radius-server timeoutRadius-server timeout seconds no radius-server timeout Tacacs no tacacs Tacacs Configuration CommandsRadius-server primary Tacacs server-ip Tacacs modeTacacs mode 1-3 master slave no tacacs mode Tacacs server-ip 1-3 ipaddr no tacacs server-ipTacacs key Tacacs portTacacs port 1-3 1-65535 no tacacs port Tacacs key 1-3 no tacacs keyTacacs retry Tacacs timeoutTacacs timeout 1-3 1-255 no tacacs timeout Tacacs retry 1-3 1-9 no tacacs retryPort-security max-dynamic Port Security Configuration Commands Port-securityPort-security no port-security Default Setting Port-security max-static Port-security max-static 0-20 no port-security max-staticPort-security mac-address move Syntax Port-security mac-address move Default SettingPort-security mac-address Show sntp client Sntp Simple Network Time Protocol CommandsShow Commands Show sntp Configuration Commands Sntp broadcast client poll-interval Sntp client mode Sntp client mode broadcast unicast no sntp client modeSntp unicast client poll-interval Sntp client portSntp client port portid 6-10 no sntp client port Sntp unicast client poll-timeout Sntp unicast client poll-retrySntp server Sntp clock timezoneSntp clock timezone name 0-12 0-59 before-utc after-utc System Utilities10.2.9 Clear Clear arpClear traplog Clear eventlogClear config Clear passClear counters Syntax Clear mac-addr-table dynamic Default SettingClear mac address table Clear counters slot/port allEnable passwd Clear igmp snoopingClear dot1x statistics Syntax Clear ip filter Default SettingClear ip filter Syntax Clear dot1x statistics all slot/portCopy Clear radius statisticsClear tacacs Privileged Exec Files download from PC to board Syntax Copy running-config startup-config filename Syntax Delete filename Syntax Copy clibanner url copy url clibanner no clibannerDelete 11.4 dirBoot-system Dir boot-rom config opcode filenameWhichboot Display Message Column Heading DescriptionBoot-system boot-rom config opcode filename PingTraceroute Calendar set Logging cli-commandSyntax Logging cli-command Default Setting Calendar set mm/dd/yy hhmmssDisconnect ConfigureReload Disconnect 0-10 allQuit Syntax Quit Default SettingHostname Syntax Ip dhcp client-identifier text text hex hex Dhcp CommandsSyntax Ip dhcp restart Default Setting Using Snmp Supported MIBs Standard MIBs are listed in the following tablePrivate enterprise MIB is listed below Accessing MIB Objects RFC 2233 IF-MIBSupported MIBs Using Snmp Supported MIBs Using Snmp Supported Traps Snmp traps supported include the following itemsDefault Settings SB9 Default Config In-band Administration Line console mode SSL Troubleshooting and Tips Diagnosing IBP IndicatorsAccessing the Management Interface Symptom Action

Related manuals

Manual 46 pages 40.75 Kb

Manual 288 pages 28.92 Kb

Manual 289 pages 43.4 Kb