Fujitsu BX600 manual Show ip filter, 1.4 mtu, Mtu 1518-9216 no mtu

Page 160

Management Commands

Command Reference

Display Message

IP default gateway: The default gateway for this IP interface. The factory default value is 0.0.0.0

7.5.1.3show ip filter

This command displays management IP filter status and all designated management stations.

Syntax

show ip filter

Default Setting

None

Command Mode

Privileged Exec

Display Message

Index: The index of stations.

IP Address: The IP address of stations that are allowed to make configuration changes to the IBP.

7.5.1.4mtu

This command sets the maximum transmission unit (MTU) size (in bytes) for physical and port-channel (LAG) interfaces. For the standard implementation, the range of <1518-9216> is a valid integer between 1518-9216.

Syntax

mtu <1518-9216> no mtu

<1518-9216> - Max frame size (Range: 1518 - 9216).

no - This command sets the default maximum transmission unit (MTU) size (in bytes) for the interface.

Default Setting

Image 160

Contents Primergy BX600 Blade Server Systems Primergy BX600 Blade Server Systems Comments… Suggestions… Corrections… Page Contents Page Page Page Important Notes 1Information About Boards2Compliance Statements Industry Canada Class aLVD Taiwan Bsmi Class a Australia AS/NZS 3548 1995 Class a Features of the IBP Module Head of Line BlockingMAC Address Supported Features MAC Address Capacity Support Flow Control Support IeeeBack Pressure Support Jumbo Frames SupportLayer 2 Features Igmp Snooping Vlan Transparency Supported FeaturesAutomatic Aging for MAC Addresses Port SecurityPort Backup Support BootP and Dhcp ClientsPort Group Support Failover Propogation SupportIBP Module Management Features Save Configuration as fileVarious Files of Management Operation Duplication of Management fileSnmp Alarms and Trap Logs Configuration File Download and UploadCommand Line Interface Snmp Version 1,Version 2, and VersionSecurity Feature Port Based AuthenticationLocked Port Support Radius ClientDescription of Hardware Internal PortsCompliance Statements Important Notes Primergy GbE Switch Blade 30/12 Internal Ports List Primergy BX620Features and Benefits Status of LEDsPort LEDs System LEDPerformance ManagementNotational Conventions Target Group Technical Data DimensionsElectrical data National and international standardsEnvironmental conditions Network Planning Introduction to IBPConnecting to 1000BASE-T Devices Making Network ConnectionsCable Testing for Existing Category 5 Cable 1000BASE-T Cable RequirementsAdjusting Existing Category 5 Cabling for 1000BASE-T 1000BASE-T Pin AssignmentsOverview Package ContentsUnpacking the IBP Module Connecting the IBP Module Mount the IBP ModuleSelect 2 Console Redirection Switch Blade Start up and Configuration the IBP Module Port Default SettingsConfiguring the Terminal Under Properties, select VT100 for Emulation modeBooting Device Boot Image Download Erasing the Device ConfigurationSoftware Download Operation Code CLI Software Download Through Tftp Server System Image DownloadTftp Main Menu Web-Based Management Interface Web-Based Management Interface Configurable Data Command ButtonsMain Menu Selection CriteriaConfiguring Port Configuration Non-Configurable DataCompliance Statements Important Notes Viewing Port Group Information Configurable Data Compliance Statements Important Notes Viewing Management Vlan Information Managing Port Backup Configuring Port Backup Configuration Viewing Port Backup Status Refresh Updates the information on Compliance Statements Important Notes Viewing Panel Description Page Configurable Data Configuring Inband Administration Terminal interface via the EIA-232 portNon-Configurable Data Compliance Statements Important Notes Configuring Telnet Session Page Configurable Data Main Menu Web-Based Management Interface Configuring Serial Port Page Configurable Data Selection Criteria Command Buttons Defining Dhcp Client Configuring Dhcp Restart Configuring Dhcp Client-identifierDefining Snmp Configuring Snmp Community Configuration Configuring Snmp Trap Receiver Configuration Viewing Snmp supported MIBs Main Menu Web-Based Management Interface Command Buttons Viewing Sntp Global Status Non-Configurable Data Configuring Sntp Server Configuration Configurable Data Viewing Sntp Server Status Non-Configurable Data Unknown IPV4Main Menu Web-Based Management Interface Configurable Data Intelligent Blade Panel Module Refresh Refresh the configuration value again Reset All Configuration to Defaults Page Command Buttons Managing System Utilities Panel Reset Command ButtonsReset the Passwords to Defaults Page Command Buttons Overview Web-Based Management Interface Uploading Specific Files from Panel Removing Specific File Copying Running Configuration to Panel Defining Ping FunctionSubmit This will initiate the ping Non-Configurable Data Viewing Radius Statistics Page Non-Configurable Data Viewing Radius Server Statistics Page Selection Criteria Command Buttons Non-Configurable Data Resetting All Radius Statistics Page Command Buttons Configurable Data Command Buttons Non-Configurable Data Overview Web-Based Management Interface Viewing Buffered Log Configuring Command Logger Page Configurable Data Configuring Console Log Viewing Event LogConfiguring Hosts configuration Page Configurable Data Configuring syslog configuration Page Configurable Data Overview Web-Based Management Interface Viewing Login Session Page Non-Configurable Data CLI Mode-based Topology Command Reference Command Buttons Non-Configurable Data CLI Mode-based Topology Command Reference CLI Mode-based Topology Command Reference 104 Intelligent Blade Panel Module 105 Intelligent Blade Panel Module CLI Mode-based Topology Command Reference CLI Mode-based Topology Command Reference Viewing Each Port Summary Statistics Page Selection Criteria Configurable Data Command Buttons Non-Configurable Data CLI Mode-based Topology Command Reference Viewing Access Control Summary Page Non-Configurable Data Command Buttons Non-Configurable Data Defining Access Control User Login Page Selection Criteria Defining Each Port Access Privileges Page Selection Criteria CLI Mode-based Topology Command Reference Managing IP Filter IP Filter Configuration Selection Criteria Defining User Login Selection Criteria CLI Command Format CommandExample Ip address ipaddr netmask vlan-id Example Clear port-groupCLI Mode-based Topology ParametersValues Network Address Syntax Address Type Format Range IPAddrMacAddr AnnotationsSystem Information and Statistics commands Show running-config Show eventlogShow running-config all scriptname Show sysinfoSystem Information Show systemShow hardware Show version Show loginsession Interface Show interface status Device Configuration CommandsShow interface status slot/port all Show interface slot/port Show interfaceShow interface counters Default Setting Show interface counters detailed slot/port switchport Total Packets Received with MAC Errors Total Packets Received Without ErrorsTotal Packets Transmitted Octets Total Packets Transmitted Successfully Total Transmit ErrorsTotal Transmited Packets Discards Management Commands Command Reference Show interface IBP Interface Interface rangeSpeed-duplex Speed-duplex 10 100 full-duplex half-duplexSpeed-duplex all 10 100 full-duplex half-duplex Full duplex Full duplex half duplex Half duplexNegotiate no negotiate NegotiateNegotiate all no negotiate all Capabilities Storm-control flowcontrol DescriptionStorm-control flowcontrol no storm-control flowcontrol Syntax Show mac-addr-table macaddr all Show mac-address-table igmpsnooping Show mac-address-table multicast Show mac-address-table multicast macaddr vlanid allShow mac-address-table stats Default Setting Show mac-address-table agetime Default SettingShow mac-address-table stats Show mac-address-table agetimeMac-address-table aging-time Management Vlan Show mgmt-vlanMgmt-vlan mgmtVlanName vlan-id no mgmt-vlan mgmtVlanName Mgmt-vlanMgmt-vlan mgmtVlanName no mgmt-vlan mgmtVlanName Igmp Snooping Show Commands Show igmp snooping Configuration Commands IgmpsnoopingShow igmpsnooping Igmpsnooping portGroupName no igmpsnooping portGroupNameLacp portGroupName no lacp portGroupName Port Channel LacpShow lacp Port Group Show Commands Port-group portGroupName no port-group portGroupNamePort Backup Show Commands Port-backup portGroupName no port-backup portGroupName Configuration Commands Port-backupDefault Setting Command Mode Port-backup no port-backup Link State Show CommandsConfiguration Commands Linkstate Linkstate portGroupName no linkstate portGroupNameNetwork Commands Show ip interface Management CommandsShow ip redirects 1.4 mtu Show ip filterMtu 1518-9216 no mtu Command Usage Ip default-gatewayIp default-gateway gateway no ip default-gateway Ip addressIp address protocol Ip address protocol bootp dhcp vlanID noneIp address mgmt-vlan Ip filter Ip filter no ip filterSerial Interface Commands Show line console Ip filter ipaddr no ip filter ipaddrLine console BaudratePassword-threshold Exec-timeoutPassword-threshold 0-120 no password-threshold Silent-time Telnet Session CommandsTelnet host port debug line echo Show line vty Line vtyExec-timeout 1-160 no exec-timeout Maxsessions 0-5 no maxsessions MaxsessionsSessions Sessions no sessions Telnet sessionsTelnet sessions no telnet sessions Telnet maxsessionsTelnet exec-timeout 1-160 no telnet exec-timeout Telnet exec-timeoutTelnet maxsessions 0-5 no maxsessions Snmp Server Commands Show snmp Show telnetShow trapflags Snmp-server sysname Snmp-server sysname nameSnmp-server location Syntax Snmp-server location locSnmp-server community Snmp-server contactSnmp-server community name no snmp-server community name Default Setting Snmp-server community ro rw name Snmp-server host Snmp-server enable trapsSnmp-server host ipaddr name no snmp-server host name No This command disables Multiple User trap Snmp Trap Commands Show snmptrap Snmp trap link-status no snmp trap link-status Snmp trap link-statusSnmp trap link-status all no snmp trap link-status all Snmptrap name ipaddr no snmptrap name ipaddr Snmptrap name ipaddrSnmptrap ipaddr Snmptrap mode Snmptrap mode name ipaddr no snmptrap mode name ipaddrHttp commands Show ip http Snmptrap ipaddr name ipaddr ipaddrnewIp javamode Ip javamode no ip javamodeIp http port Ip http port 1-65535 no ip http portIp http server Ip http server no ip http serverIp http secure-port Ip http secure-port portid no ip http secure-portIp http secure-server Ip http secure-server no ip http secure-serverSecure Shell SSH Commands Show ip ssh Ip http secure-protocolIp ssh no ip ssh Ip sshIp ssh protocol Ip ssh maxsessions Ip ssh timeoutIp ssh maxsessions 0-5 no ip ssh maxsessions Dhcp Client Commands Ip dhcp restart Ip ssh timeout 1-160 no ip ssh timeoutIp dhcp client-identifier System Burned In MAC Address Lock Commands Lockmessage messagestring defaultLock lockidentifier Exclusive no lock lockidentifierALL LockmessageLockreset Show lockShow Commands Show logging System Log Management CommandsShow logging buffered Show logging traplogs Show logging traplogShow logging hosts Display Message Index used for deleting Configuration Commands Logging bufferedLogging buffered no logging buffered Logging console Logging buffered wrap no logging buffered wrapLogging console severitylevel 0-7 no logging console Logging host Logging host hostaddress port severitylevelLogging syslog Logging host reconfigure hostindex hostaddressLogging syslog no logging syslog Logging syslog port portid no logging syslog port Clear logging bufferedScript Management Commands Script applyScript apply scriptname Script deleteScript show Script listScript show scriptname Show Commands Show users User Account Management CommandsConfiguration Commands Username Username username password nopassword no username username Username snmpv3 authenticationUsername snmpv3 encryption Show Commands Show users authentication Security CommandsShow authentication Show authentication users Show dot1xShow dot1x detail Show dot1x statistics Show dot1x statistics slot/portShow dot1x summary slot/port all Show dot1x summaryShow dot1x users Show radius-servers Secret Configured Yes / NoShow radius Radius Accounting Mode Enabled or disabled Show radius accounting statistics ipaddrShow radius statistics Secret Configured Yes or NoShow radius statistics ipaddr Show tacacs Show port-security Show port-security dynamic slot/port Configuration Commands Authentication login Username defaultlogin Possible method values are local, radius, reject, and tacacsUsername login Username login user listname3 Dot1x Configuration Commands 3.1 dot1x initialize 3.2 dot1x default-login3.3 dot1x login Dot1x login user listname3.4 dot1x system-auth-control Dot1x system-auth-control no dot1x system-auth-control3.5 dot1x user 3.6 dot1x port-control3.7 dot1x max-req 3.8 dot1x re-authentication Dot1x re-authentication no dot1x re-authentication3.9 dot1x re-reauthenticate Dot1x max-req 1-10 no dot1x max-req3.10 dot1x timeout Radius Configuration Commands Radius accounting mode Radius accounting mode no radius accounting modeRadius-server host Radius-sever keyRadius-server retransmit Retries the maximum number of times Range 1Radius-server timeout seconds no radius-server timeout Radius-server timeoutRadius-server msgauth Radius-server primary Tacacs Configuration CommandsTacacs no tacacs Tacacs mode Tacacs mode 1-3 master slave no tacacs modeTacacs server-ip Tacacs server-ip 1-3 ipaddr no tacacs server-ipTacacs port Tacacs port 1-3 1-65535 no tacacs portTacacs key Tacacs key 1-3 no tacacs keyTacacs timeout Tacacs timeout 1-3 1-255 no tacacs timeoutTacacs retry Tacacs retry 1-3 1-9 no tacacs retryPort-security no port-security Default Setting Port Security Configuration Commands Port-securityPort-security max-dynamic Port-security max-static Port-security max-static 0-20 no port-security max-staticPort-security mac-address Syntax Port-security mac-address move Default SettingPort-security mac-address move Show Commands Show sntp Sntp Simple Network Time Protocol CommandsShow sntp client Configuration Commands Sntp broadcast client poll-interval Sntp client mode Sntp client mode broadcast unicast no sntp client modeSntp client port portid 6-10 no sntp client port Sntp client portSntp unicast client poll-interval Sntp unicast client poll-timeout Sntp unicast client poll-retrySntp server Sntp clock timezoneSystem Utilities 10.2.9Sntp clock timezone name 0-12 0-59 before-utc after-utc Clear Clear arpClear traplog Clear eventlogClear config Clear passSyntax Clear mac-addr-table dynamic Default Setting Clear mac address tableClear counters Clear counters slot/port allEnable passwd Clear igmp snoopingSyntax Clear ip filter Default Setting Clear ip filterClear dot1x statistics Syntax Clear dot1x statistics all slot/portClear tacacs Clear radius statisticsCopy Privileged Exec Files download from PC to board Syntax Copy running-config startup-config filename Syntax Copy clibanner url copy url clibanner no clibanner DeleteSyntax Delete filename 11.4 dirDir boot-rom config opcode filename WhichbootBoot-system Display Message Column Heading DescriptionBoot-system boot-rom config opcode filename PingTraceroute Logging cli-command Syntax Logging cli-command Default SettingCalendar set Calendar set mm/dd/yy hhmmssConfigure ReloadDisconnect Disconnect 0-10 allHostname Syntax Quit Default SettingQuit Syntax Ip dhcp restart Default Setting Dhcp CommandsSyntax Ip dhcp client-identifier text text hex hex Using Snmp Supported MIBs Standard MIBs are listed in the following tablePrivate enterprise MIB is listed below Accessing MIB Objects RFC 2233 IF-MIBSupported MIBs Using Snmp Supported MIBs Using Snmp Supported Traps Snmp traps supported include the following itemsDefault Settings SB9 Default Config In-band Administration Line console mode SSL Troubleshooting and Tips Diagnosing IBP IndicatorsAccessing the Management Interface Symptom Action

Related manuals

Manual 46 pages 40.75 Kb

Manual 288 pages 28.92 Kb

Manual 289 pages 43.4 Kb