Fujitsu BX600 manual Features and Benefits, Status of LEDs, Port LEDs, System LED, Connectivity

Compliance Statements Important Notes

2.2.2 Status of LEDs

The front panel contains light emitting diodes (LED) that indicate the status of links, and IBP diagnostics.

Port LEDs

Each of uplink port has two LED indicators.

One Gbe Port LED definition:

LED	Color	Function
LED-A	Orange	Port Link at 1000 Mbps
(Speed)
	Green	Port Link at 100 Mbps
	Off	Port Link at 10 Mbps
LED-B	Yellow	Network Link
(Link/Activity)
	Yellow Blink	Network Activity
	Off	No Network Link or port disable

Power, Manage of LED indicator:

LED	Color	Function
TOP	Green	Power LED
BUTTOM	Green	Identify LED

System LED

There is one IBP Module system LED with dual functions, controlled by MMB for error status reporting and blade identification. Different flashing frequencies are used to indicate the different functions. There are two functions, identification and error reporting, with identification having a higher priority than error reporting.

NOTE: If there is an error and the identification function is activated, the LED still functions as an identification LED. The LED can only be disabled by the MMB with a 255 seconds timeout. If an error is happening, the LED for error reporting will always be flashing and cannot be turn off. The following table describes the system LED indications.

2.3Features and Benefits

2.3.1Connectivity

l30 internal Gigabit ports for easy network integration of your server cards

l12 external 1000BASE-T Gigabit ports for uplinking to the corporate network

lSupport for auto MDI/MDI-X on external ports allows any connections to be made with straight-through cable (with auto-negotiation enabled)