Fujitsu BX600 manual Management Commands, Network Commands Show ip interface, Show ip redirects

Page 159

Management Commands

Command Reference

7.5Management Commands

7.5.1Network Commands

7.5.1.1show ip interface

This command displays configuration settings associated with the IBP's network interface. The network interface is the logical interface used for in-band connectivity with the IBP via any of the IBP's front panel ports. The configuration parameters associated with the IBP's network interface do not affect the configuration of the front panel ports through which traffic is switched or routed.

Syntax

show ip interface

Default Setting

None

Command Mode

Privileged Exec

Display Message

IP Address: The IP address of the interface. The factory default value is 0.0.0.0

Subnet Mask: The IP subnet mask for this interface. The factory default value is 0.0.0.0

Inband Administration VLAN ID: Specifies the inband administration VLAN ID.

7.5.1.2show ip redirects

This command displays IP default gateway for this IBP.

Syntax

show ip redirects

Default Setting

None

Command Mode

Privileged Exec

Image 159

Contents Primergy BX600 Blade Server Systems Primergy BX600 Blade Server Systems Comments… Suggestions… Corrections… Page Contents Page Page Page 1Information About Boards Important NotesIndustry Canada Class a 2Compliance StatementsLVD Taiwan Bsmi Class a Australia AS/NZS 3548 1995 Class a Head of Line Blocking Features of the IBP ModuleJumbo Frames Support MAC Address Supported Features MAC Address Capacity SupportFlow Control Support Ieee Back Pressure SupportPort Security Layer 2 Features Igmp SnoopingVlan Transparency Supported Features Automatic Aging for MAC AddressesFailover Propogation Support Port Backup SupportBootP and Dhcp Clients Port Group SupportDuplication of Management file IBP Module Management FeaturesSave Configuration as file Various Files of Management OperationSnmp Version 1,Version 2, and Version Snmp Alarms and Trap LogsConfiguration File Download and Upload Command Line InterfaceRadius Client Security FeaturePort Based Authentication Locked Port SupportInternal Ports Description of HardwareCompliance Statements Important Notes Primergy BX620 Primergy GbE Switch Blade 30/12 Internal Ports ListSystem LED Features and BenefitsStatus of LEDs Port LEDsManagement PerformanceNotational Conventions Target Group National and international standards Technical DataDimensions Electrical dataEnvironmental conditions Introduction to IBP Network PlanningMaking Network Connections Connecting to 1000BASE-T Devices1000BASE-T Cable Requirements Cable Testing for Existing Category 5 Cable1000BASE-T Pin Assignments Adjusting Existing Category 5 Cabling for 1000BASE-TPackage Contents OverviewUnpacking the IBP Module Mount the IBP Module Connecting the IBP ModuleSelect 2 Console Redirection Switch Blade Port Default Settings Start up and Configuration the IBP ModuleUnder Properties, select VT100 for Emulation mode Configuring the TerminalBooting Device Erasing the Device Configuration Boot Image DownloadSoftware Download System Image Download Operation Code CLI Software Download Through Tftp ServerTftp Main Menu Web-Based Management Interface Web-Based Management Interface Selection Criteria Configurable DataCommand Buttons Main MenuNon-Configurable Data Configuring Port ConfigurationCompliance Statements Important Notes Viewing Port Group Information Configurable Data Compliance Statements Important Notes Viewing Management Vlan Information Managing Port Backup Configuring Port Backup Configuration Viewing Port Backup Status Refresh Updates the information on Compliance Statements Important Notes Viewing Panel Description Page Configurable Data Terminal interface via the EIA-232 port Configuring Inband AdministrationNon-Configurable Data Compliance Statements Important Notes Configuring Telnet Session Page Configurable Data Main Menu Web-Based Management Interface Configuring Serial Port Page Configurable Data Selection Criteria Command Buttons Configuring Dhcp Client-identifier Defining Dhcp Client Configuring Dhcp RestartDefining Snmp Configuring Snmp Community Configuration Configuring Snmp Trap Receiver Configuration Viewing Snmp supported MIBs Main Menu Web-Based Management Interface Command Buttons Viewing Sntp Global Status Non-Configurable Data Configuring Sntp Server Configuration Configurable Data Unknown IPV4 Viewing Sntp Server Status Non-Configurable DataMain Menu Web-Based Management Interface Configurable Data Intelligent Blade Panel Module Refresh Refresh the configuration value again Managing System Utilities Panel Reset Command Buttons Reset All Configuration to Defaults Page Command ButtonsReset the Passwords to Defaults Page Command Buttons Overview Web-Based Management Interface Uploading Specific Files from Panel Removing Specific File Defining Ping Function Copying Running Configuration to PanelSubmit This will initiate the ping Non-Configurable Data Viewing Radius Statistics Page Non-Configurable Data Viewing Radius Server Statistics Page Selection Criteria Command Buttons Non-Configurable Data Resetting All Radius Statistics Page Command Buttons Configurable Data Command Buttons Non-Configurable Data Overview Web-Based Management Interface Viewing Buffered Log Configuring Command Logger Page Configurable Data Viewing Event Log Configuring Console LogConfiguring Hosts configuration Page Configurable Data Configuring syslog configuration Page Configurable Data Overview Web-Based Management Interface Viewing Login Session Page Non-Configurable Data CLI Mode-based Topology Command Reference Command Buttons Non-Configurable Data CLI Mode-based Topology Command Reference CLI Mode-based Topology Command Reference 104 Intelligent Blade Panel Module 105 Intelligent Blade Panel Module CLI Mode-based Topology Command Reference CLI Mode-based Topology Command Reference Viewing Each Port Summary Statistics Page Selection Criteria Configurable Data Command Buttons Non-Configurable Data CLI Mode-based Topology Command Reference Viewing Access Control Summary Page Non-Configurable Data Command Buttons Non-Configurable Data Defining Access Control User Login Page Selection Criteria Defining Each Port Access Privileges Page Selection Criteria CLI Mode-based Topology Command Reference Managing IP Filter IP Filter Configuration Selection Criteria Defining User Login Selection Criteria Example Clear port-group CLI Command FormatCommand Example Ip address ipaddr netmask vlan-idNetwork Address Syntax Address Type Format Range IPAddr CLI Mode-based TopologyParameters ValuesAnnotations MacAddrSystem Information and Statistics commands Show eventlog Show running-configShow sysinfo Show running-config all scriptnameShow system System InformationShow hardware Show version Show loginsession Device Configuration Commands Interface Show interface statusShow interface status slot/port all Show interface Show interface slot/portShow interface counters Default Setting Show interface counters detailed slot/port switchport Total Packets Received Without Errors Total Packets Received with MAC ErrorsTotal Packets Transmitted Octets Total Transmit Errors Total Packets Transmitted SuccessfullyTotal Transmited Packets Discards Management Commands Command Reference Show interface IBP Interface range InterfaceFull duplex Full duplex half duplex Half duplex Speed-duplexSpeed-duplex 10 100 full-duplex half-duplex Speed-duplex all 10 100 full-duplex half-duplexNegotiate Negotiate no negotiateNegotiate all no negotiate all Capabilities Description Storm-control flowcontrolStorm-control flowcontrol no storm-control flowcontrol Syntax Show mac-addr-table macaddr all Show mac-address-table igmpsnooping Show mac-address-table multicast macaddr vlanid all Show mac-address-table multicastShow mac-address-table agetime Show mac-address-table stats Default SettingShow mac-address-table agetime Default Setting Show mac-address-table statsManagement Vlan Show mgmt-vlan Mac-address-table aging-timeMgmt-vlan Mgmt-vlan mgmtVlanName vlan-id no mgmt-vlan mgmtVlanNameMgmt-vlan mgmtVlanName no mgmt-vlan mgmtVlanName Igmpsnooping portGroupName no igmpsnooping portGroupName Igmp Snooping Show Commands Show igmp snoopingConfiguration Commands Igmpsnooping Show igmpsnoopingPort Channel Lacp Lacp portGroupName no lacp portGroupNameShow lacp Port-group portGroupName no port-group portGroupName Port Group Show CommandsPort Backup Show Commands Configuration Commands Port-backup Port-backup portGroupName no port-backup portGroupNameDefault Setting Command Mode Link State Show Commands Port-backup no port-backupLinkstate portGroupName no linkstate portGroupName Configuration Commands LinkstateManagement Commands Network Commands Show ip interfaceShow ip redirects Show ip filter 1.4 mtuMtu 1518-9216 no mtu Ip address Command UsageIp default-gateway Ip default-gateway gateway no ip default-gatewayIp address protocol bootp dhcp vlanID none Ip address protocolIp address mgmt-vlan Ip filter no ip filter Ip filterIp filter ipaddr no ip filter ipaddr Serial Interface Commands Show line consoleBaudrate Line consoleExec-timeout Password-thresholdPassword-threshold 0-120 no password-threshold Telnet Session Commands Silent-timeTelnet host port debug line echo Line vty Show line vtyExec-timeout 1-160 no exec-timeout Maxsessions Maxsessions 0-5 no maxsessionsSessions Telnet maxsessions Sessions no sessionsTelnet sessions Telnet sessions no telnet sessionsTelnet exec-timeout Telnet exec-timeout 1-160 no telnet exec-timeoutTelnet maxsessions 0-5 no maxsessions Show telnet Snmp Server Commands Show snmpShow trapflags Syntax Snmp-server location loc Snmp-server sysnameSnmp-server sysname name Snmp-server locationSnmp-server contact Snmp-server communitySnmp-server community name no snmp-server community name Default Setting Snmp-server community ro rw name Snmp-server enable traps Snmp-server hostSnmp-server host ipaddr name no snmp-server host name No This command disables Multiple User trap Snmp Trap Commands Show snmptrap Snmp trap link-status Snmp trap link-status no snmp trap link-statusSnmp trap link-status all no snmp trap link-status all Snmptrap name ipaddr Snmptrap name ipaddr no snmptrap name ipaddrSnmptrap ipaddr Snmptrap ipaddr name ipaddr ipaddrnew Snmptrap modeSnmptrap mode name ipaddr no snmptrap mode name ipaddr Http commands Show ip httpIp javamode no ip javamode Ip javamodeIp http server no ip http server Ip http portIp http port 1-65535 no ip http port Ip http serverIp http secure-server no ip http secure-server Ip http secure-portIp http secure-port portid no ip http secure-port Ip http secure-serverIp http secure-protocol Secure Shell SSH Commands Show ip sshIp ssh Ip ssh no ip sshIp ssh protocol Ip ssh timeout Ip ssh maxsessionsIp ssh maxsessions 0-5 no ip ssh maxsessions Ip ssh timeout 1-160 no ip ssh timeout Dhcp Client Commands Ip dhcp restartIp dhcp client-identifier System Burned In MAC Address Lockmessage Lock CommandsLockmessage messagestring default Lock lockidentifier Exclusive no lock lockidentifierALLShow lock LockresetSystem Log Management Commands Show Commands Show loggingShow logging buffered Show logging traplog Show logging traplogsShow logging hosts Configuration Commands Logging buffered Display Message Index used for deletingLogging buffered no logging buffered Logging buffered wrap no logging buffered wrap Logging consoleLogging console severitylevel 0-7 no logging console Logging host hostaddress port severitylevel Logging hostLogging host reconfigure hostindex hostaddress Logging syslogLogging syslog no logging syslog Clear logging buffered Logging syslog port portid no logging syslog portScript delete Script Management CommandsScript apply Script apply scriptnameScript list Script showScript show scriptname User Account Management Commands Show Commands Show usersConfiguration Commands Username Username snmpv3 authentication Username username password nopassword no username usernameUsername snmpv3 encryption Security Commands Show Commands Show users authenticationShow authentication Show dot1x Show authentication usersShow dot1x detail Show dot1x statistics slot/port Show dot1x statisticsShow dot1x summary Show dot1x summary slot/port allShow dot1x users Secret Configured Yes / No Show radius-serversShow radius Show radius accounting statistics ipaddr Radius Accounting Mode Enabled or disabledSecret Configured Yes or No Show radius statisticsShow radius statistics ipaddr Show tacacs Show port-security Show port-security dynamic slot/port Configuration Commands Authentication login Possible method values are local, radius, reject, and tacacs Username defaultloginUsername login user listname Username login3.2 dot1x default-login 3 Dot1x Configuration Commands 3.1 dot1x initializeDot1x system-auth-control no dot1x system-auth-control 3.3 dot1x loginDot1x login user listname 3.4 dot1x system-auth-control3.6 dot1x port-control 3.5 dot1x user3.7 dot1x max-req Dot1x max-req 1-10 no dot1x max-req 3.8 dot1x re-authenticationDot1x re-authentication no dot1x re-authentication 3.9 dot1x re-reauthenticate3.10 dot1x timeout Radius accounting mode no radius accounting mode Radius Configuration Commands Radius accounting modeRadius-sever key Radius-server hostRetries the maximum number of times Range 1 Radius-server retransmitRadius-server timeout Radius-server timeout seconds no radius-server timeoutRadius-server msgauth Tacacs Configuration Commands Radius-server primaryTacacs no tacacs Tacacs server-ip 1-3 ipaddr no tacacs server-ip Tacacs modeTacacs mode 1-3 master slave no tacacs mode Tacacs server-ipTacacs key 1-3 no tacacs key Tacacs portTacacs port 1-3 1-65535 no tacacs port Tacacs keyTacacs retry 1-3 1-9 no tacacs retry Tacacs timeoutTacacs timeout 1-3 1-255 no tacacs timeout Tacacs retryPort Security Configuration Commands Port-security Port-security no port-security Default SettingPort-security max-dynamic Port-security max-static 0-20 no port-security max-static Port-security max-staticSyntax Port-security mac-address move Default Setting Port-security mac-addressPort-security mac-address move Sntp Simple Network Time Protocol Commands Show Commands Show sntpShow sntp client Configuration Commands Sntp broadcast client poll-interval Sntp client mode broadcast unicast no sntp client mode Sntp client modeSntp client port Sntp client port portid 6-10 no sntp client portSntp unicast client poll-interval Sntp unicast client poll-retry Sntp unicast client poll-timeoutSntp clock timezone Sntp serverClear Clear arp System Utilities10.2.9 Sntp clock timezone name 0-12 0-59 before-utc after-utcClear eventlog Clear traplogClear pass Clear configClear counters slot/port all Syntax Clear mac-addr-table dynamic Default SettingClear mac address table Clear countersClear igmp snooping Enable passwdSyntax Clear dot1x statistics all slot/port Syntax Clear ip filter Default SettingClear ip filter Clear dot1x statisticsClear radius statistics Clear tacacsCopy Privileged Exec Files download from PC to board Syntax Copy running-config startup-config filename 11.4 dir Syntax Copy clibanner url copy url clibanner no clibannerDelete Syntax Delete filenameDisplay Message Column Heading Description Dir boot-rom config opcode filenameWhichboot Boot-systemPing Boot-system boot-rom config opcode filenameTraceroute Calendar set mm/dd/yy hhmmss Logging cli-commandSyntax Logging cli-command Default Setting Calendar setDisconnect 0-10 all ConfigureReload DisconnectSyntax Quit Default Setting HostnameQuit Dhcp Commands Syntax Ip dhcp restart Default SettingSyntax Ip dhcp client-identifier text text hex hex Using Snmp Standard MIBs are listed in the following table Supported MIBsPrivate enterprise MIB is listed below RFC 2233 IF-MIB Accessing MIB ObjectsSupported MIBs Using Snmp Supported MIBs Using Snmp Snmp traps supported include the following items Supported TrapsDefault Settings SB9 Default Config In-band Administration Line console mode SSL Diagnosing IBP Indicators Troubleshooting and TipsSymptom Action Accessing the Management Interface

Related manuals

Manual 46 pages 40.75 Kb

Manual 288 pages 28.92 Kb

Manual 289 pages 43.4 Kb