Fujitsu BX600 manual Radius-server retransmit, Retries the maximum number of times Range 1

SNTP (Simple Network Time Protocol) Commands Command Reference

This command is used to configure the shared secret between the RADIUS client and the RADIUS accounting / authentication server. Depending on whether the 'auth' or 'acct' token is used, the shared secret will be configured for the RADIUS authentication or RADIUS accounting server. The IP address provided must match a previously configured server. When this command is executed, the secret will be prompted. The secret must be an alphanumeric value not exceeding 20 characters.

Syntax

radius-server key {acct auth} <ipaddr>

<ipaddr> - is a IP address.

Default Setting

None

Command Mode

Global Config

7.9.4.4 radius-server retransmit

This command sets the maximum number of times a request packet is re-transmitted when no response is received from the RADIUS server. The retries value is an integer in the range of 1 to 15.

Syntax

radius-server retransmit <retries> no radius-server retransmit

<retries> - the maximum number of times (Range: 1 - 15).

no - This command sets the maximum number of times a request packet is re-transmitted, when no response is received from the RADIUS server, to the default value, that is, 10.

Default Setting

10

Command Mode

Global Config