③Pull up the ADF paper chute as follows:
•Hold the document cover with one hand and pull up the ADF paper chute with the other hand until it clicks.
ADF paper chute
Document cover
ADF paper chute
Push for storage
Shaft | Document cover |
Figure 4.3 ADF paper chute setting
④Fan the documents as follows:
•Take a 15 to 20 mm thickness of documents. Lightly hold both ends with both hands. Bend the documents into an arch as shown below.
•Then hold the documents tightly with both hands, and straighten the documents. The center of documents swell and air is introduced between the documents.
•Repeat this operation two or three times.
•Turn the documents 90°, and repeat the operation again.
15 to 20 mm
4 – 7