③Insert the pad assembly into the ADF frame hole (the bigger one), slide the assembly to the direction of the arrow until it clicks.
ADF frame
Pad assy
NOTICE: Pad can be replaced by aligning the holes of the pad with the pins of the Pad holder.
5.4.3Replacing pick roller
Replace the pickroller as follows.
Pad holder
Pad
Pick spring
Thumb Screw
Guide A
a.Pull the cap up to open the ADF unit.
b.Remove two thumb screws shown in Figure 5.4. And re- move the Guide A.
Thumb Screw
Figure 5.4 Pick Roller replacement
5 – 5