c.Pinch the retaining spring and slide it toward the roller. Free bearing A from the bracket by sliding it toward the roller.
Bearing A
Retaining Spring
Figure 5.5 Move the Retaining spring
d. Slide the pick roller shaft in the |
|
direction of arrow B and remove |
|
the shaft from bearing B. |
|
The roller shaft can then be lifted |
|
and removed as shown in Figure | Arrow B |
5.6. |
|
e. Remove the bearing B. |
|
f. Mount the new pick roller in |
|
reverse order of removal. |
|
| Bearing B |
Figure 5.6 | Slide the Pick Roller |
NOTICE: When mounting the Guide A, note that the hooks of the retaining spring are not pressed by the Guide A. (See figure below)
Guide A
× | Retaining spring |
|
5 – 6