IBM 31x Graphic display mode, Double-size letter in horizontal, Horizontal scroll on all lines

Input/output device commands 11-9-2005

available.)

X'B0A0'--X'B0FF', X'B1A0'--X'C8FF' (Positions X'B100'--X'B19F' are not available.)

X'CAA0'--X'CAFF', X'CBA0'--X'FDFF' (Positions X'CB00'--X'CB9F' are not available.)

Simplified Chinese GB2312-80 (Font selection X'1B', X'53', X'33') X'A1A0'--X'A1FF',X'A2A0'--X'A9FF' (Positions X'A200'--X'A29F' are not available.)

X'B0A0'--X'B0FF', X'B1A0'--X'F7FF' (Positions X'B100'--X'B19F' are not available.)

Traditional Chinese Big-5 (Font selection X'1B', X'53', X'34') X'A140'--X'A1FF',X'A2A0'--X'C6FF' (Positions X'A200'--X'A23F' are not available.)

X'C940'--X'C9FF', X'CA40'--X'F9FF' (Positions X'CA00'--X'CA3F' are not available.)

Graphic display mode

1B 5C 3F 4C 47 Px 3B Py 3B Ph 3B Pw 3B Pd

Purpose:

This command specifies the graphic display mode. The control bytes embedded in the command sequence (represented by Px, Py, Ph, and Pw in the command format), change the graphic display characteristics. Pd represents the data byte.

Px (display	0	∼	159	(X'30'	∼	X'31',	X'35', X'39')
position)
Py (display	0	∼	39	(X'30'	∼	X'33',	X'39')
position)
Ph (height)	1	∼	40	(X'31'	∼	X'34',	X'30')
Pw (width)	1	∼	160	(X'31' ∼ X'31', X'36', X'30')
Pd	The display data.

Double-size letter in horizontal

1B 23 Ps

Purpose:

This command sets a character with double-size letter in horizontal. It is available for all full-size letter, all half-size letter, and ANK font.

Ps	5	=	Normal-size	letter
	6	=	Double-size	letter in horizontal

Horizontal scroll on all lines

The format of the Horizontal Scroll Select command is as follows:

1B 5C 3F 4C 4D 53

Purpose:

This command sets horizontal scroll mode.

A-14SurePOS Installation and Service