Table 24. Removal steps of fan assembly and backup battery
Loosen the screws 10 .
DANGER
Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode.
10
12
10
10 |
10
11
14
13
When installing: Make sure that the connector is attached firmly.
1140 CRT board assembly (with cable)
For access, remove these FRUs in order:
•“1010 Battery pack” on page 50
•“1020 Bottom slot cover” on page 51
•“1040 Hard disk drive or solid state drive assembly” on page 53
•“1070 Keyboard” on page 57
•“1090 Top case assembly” on page 60
•“1130 System board assembly, fan assembly, and backup battery” on page 65
Chapter 8. Removing and replacing a FRU 67