Note: When you initialize the computer configuration, some devices are disabled, such as the serial port. If you test one of these devices, you will need to enable it by using Configuration utility for DOS. The utility is available on the following Web site: http://www.lenovo.com/support
Testing the computer
Note: The
To run the test, do as follows:
1.Turn off the computer.
2.Make sure that the optical drive that is supported as a startup device is installed to the computer you are servicing.
3.Turn on the computer. If the computer cannot be powered on, go to “Power system checkout” on page 28, and check the power sources.
If an error code appears, go to
4.When the ThinkPad logo comes up, immediately press F12 to enter the Network Boot menu.
5.Insert the
6.Press cursor keys to select ATAPI CDx (x: 0, 1, ...) and then press Enter.
7.Follow the instructions on the screen.
8.The main panel of
9.Select Diagnostics with the arrow keys, and press Enter.
Note: You can select an item not only with the arrow keys, but also with the TrackPoint® pointer. Instead of pressing Enter, click the left button.
A
Note:
Diagnostics
Interactive Tests | Hardware Info | Utility | Quit | F1=Help |
Run Normal Test
Run Quick Test
CPU/Coprocessor
System Memory
Systemboard
Video Adapter
Fixed Disks
Diskette Drives
Other Devices
Communication
Wireless LAN
Use the cursor keys and ESC to move in menus. Press ENTER to select.
The options on the test menu are as follows:
Chapter 3. General checkout 25