IBM 48X-20X manual Attaching the cables to the drive, Completing the hardware installation

Page 14

Step 6. Attaching the cables to the drive

3.Check to make sure the alignment is correct; then tighten the screws to secure the drive. Do not overtighten.

Step 6. Attaching the cables to the drive

Connect the cables to the CD-ROM drive as follows.

1.If you have an audio adapter, locate the included audio cables and determine which cable best fits the CD audio-in port on your audio

adapter. Connect one end of the selected audio cable to the device audio-out connector «1¬, and the other end of the cable to your audio adapter CD audio-in port. Save the other cable in case you use a different audio adapter in the future.

2.Attach a 40-pin IDE cable connector «2¬to the IDE connector on the drive.

Align the cable so that the color-coded edge is closest to the power cable connector «3¬. Use the IDE cable provided with this option if there is no cable attached to the IDE port or if there is only one device connector on the IDE cable.

3.Attach a four-pin power cable «3¬ to the device dc power connector.

Step 7. Completing the hardware installation

1.Be sure that the drive is securely mounted and the connectors are firmly attached.

2.Be sure that the cables do not interfere with the computer cover and do not block the power-supply fan blades or air-flow paths.

3.Reinstall the computer cover.

4.Reconnect all devices and check any devices that might have become disconnected, such as the keyboard, mouse, and monitor.

5.Connect all power cords to electrical outlets.

1-648X-20X Internal IDE CD-ROM Drive: User's Guide

Image 14

Contents OPTIONS 48X-20X Internal IDE CD-ROM DriveUsers Guide by IBMFirst Edition September Contents iv 48X-20X Internal IDE CD-ROM Drive Users Guide Registering your option Part 1 Installation and users guideAbout this book Part 2 Appendixesvi 48X-20X Internal IDE CD-ROM Drive Users Guide Safety information Antes de instalar este produto, leia as Informações sobre Segurança Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisyLäs säkerhetsinformationen innan du installerar den här produkten Antes de instalar este producto lea la información de seguridadBefore you begin Part 1 Installation and users guideProduct description System requirements Handling instructions «1¬Reserved Back view of the drive Front view of the drive Step 2. Unpacking the drive Installing the driveStep 1. Opening the computer Step 3. Selecting the IDE portStep 4. Setting the configuration jumper Step 5. Mounting the drive in the bayStep 7. Completing the hardware installation Step 6. Attaching the cables to the driveStep 8. Updating your computer configuration Step 9. Installing device driversCaring for the CD-ROM drive Use and care of the driveCaring for a CD Loading a CD To load a CD into a vertically mounted CD-ROM drive do the following Playing an audio CD Using a data CDManually ejecting a CD Windows 95, Windows 98, Windows NT 4.0, Windows 2000, or Windows Me3. Double-click My Computer 1. Click Start--Settings--Control Panel Appendix A. Customizing device driver configuration settingsChanging the Windows 98 and Windows Me device-driver settings Changing the Windows 2000 desktop device driver7. Click the Advanced Settings tab Appendix B. Problem solving Problem descriptionsTo verify that the icon is there do the following Appendix B. Problem solving 1. Click Start -- Settings -- Control Panelb. Click Properties B-4 48X-20X Internal IDE CD-ROM Drive Users Guide The CD cannot be readThe CD does not play sound You receive a common error message v CDR-101v CDR-103 2. Select PropertiesTelephone technical support Appendix C. Help and service informationOnline technical support Canada all other Support 24 hours a day, 7 days a weekCanada Toronto only U.S.A. and Puerto RicoAppendix D. Product warranties and notices Warranty StatementsThe IBM Warranty for Machines WARRANTIES OF ANY KIND Extent of WarrantyItems Not Covered by Warranty OF ANY KINDWarranty Service D-4 48X-20X Internal IDE CD-ROM Drive Users Guide Production StatusLimitation of Liability The IBM Warranty for Machines OF ANY KIND Warranty Service D-6 48X-20X Internal IDE CD-ROM Drive Users GuideProduction Status ASIA PACIFIC AUSTRALIA The IBM Warranty for Machines The following paragraph isPart 2 - Worldwide Country-Unique Terms D-8 48X-20X Internal IDE CD-ROM Drive Users GuideEUROPE, MIDDLE EAST, AFRICA EMEA NEW ZEALAND The IBM Warranty for Machines The following paragraphPEOPLES REPUBLIC OF CHINA Governing Law The following is added to The following terms apply to all EMEA countriesThe following terms apply to the country specified D-11 D-12 48X-20X Internal IDE CD-ROM Drive Users Guide UNITED STATES OF AMERICA Warranty Service The following is added toNORTH AMERICA Notices D-13Trademarks 48X-20X CD-ROM Drive Federal Communications Commission FCC statementD-15 Industry Canada Class B emission compliance statementEuropean Union - emission directive Avis de conformite a la reglementation dIndustrie CanadaDeutsche EMV-Direktive electromagnetische Verträglichkeit Union Européenne - Directive Conformité électromagnétiqueUnion Europea - Normativa EMC D-17Unione Europea - Directiva EMC Conformidad électromagnética D-18 48X-20X Internal IDE CD-ROM Drive Users Guide Page 1P P/N 10K3783 IBMRPart Number 10K3783