connector at one end of the cable to the IDE port. Attach the
You cannot access the
When the
To verify that the icon is there do the following:
1.
2.Look for an icon for the
If a
1.Make sure that the drive has been properly installed.
2.Make sure that the configuration jumper is set properly. See ªStep 4. Setting the configuration jumperº on page
3.Restart your computer.
If the device icon is still not present, check cable connections and configuration jumper settings on other devices, and resolve any conflicts that might exist.
If a drive icon is still not found after you try the above procedures, continue with the following steps.
If you are using Windows 95, Windows 98, or Windows Me follow these instructions:
1.Click
2.Double click System.
3.Click the Device Managertab.
4.At the top of the box, click View Devices by Type.
5.
a.Click to select a controller from the list.
b.Click the Properties button.
c.On the General tab, under Device Status, there is a statement that indicates whether that controller is working properly. Click OK to return to the Device Manager tab in the System Properties window.