IBM 48X-20X manual Manually ejecting a CD, Playing an audio CD, Using a data CD, 1-11

Manually ejecting a CD

If you press the Eject/Load button and the tray does not slide out, turn off the computer. Straighten a large paper clip to form a tool, as shown in the illustration below. The straightened end must extend at least 45 mm (1.8 in.). Insert the extended end into the manual-eject hole on the front of the drive (see ªFront view of the driveº on page 1-3). Push the paper clip into the hole until the tray opens. Gently pull out the tray until you can remove the CD.

45mm

1.8in

Playing an audio CD

To play an audio CD, you must have an audio-CD program installed in your computer. Windows 98, Windows Me, Windows NT, and Windows 2000 applications include audio CD player programs.

For more information on using your audio playback software, see the documentation that comes with your operating system or your computer.

Windows 95, Windows 98, Windows NT 4.0, Windows 2000, or Windows Me

To use the audio utility do the following:

1.Turn on your computer and start your operating system, if you have not already done so.

2.Insert an audio CD into the CD-ROM drive.

3.The CD begins playing. If the CD does not start playing, or if you have problems with the audio, check the documentation that comes with your audio adapter or computer for problem-solving information.

Using a data CD

Data CDs can contain data files, games, or applications.

Windows 95, Windows 98, Windows NT 4.0, Windows 2000, or Windows Me

To read a data CD do the following:

1.Turn on your computer and start your operating system, if you have not already done so.

Part 1: Installation and user's guide 1-11