IBM 37L1388 manual Windows 95 or Windows, Start, Device, Player

Manually

ejecting

a

CD

If

you

press

the

Eject/Load

button

and

the

tray

does

not

slide

out,

turn

off

the

computer

and

straighten

a

large

paper

clip

to

form

a

tool, as shown

in

the

illustration.

The

straightened

end

must

extend

at

least

45

mm

(1.8

in.).

Insert

the

extended

end

into

the

manual-eject

hole

on

the

front

of

the

drive (see

“Front

view

of

the

drive” on

page

1-3). Push

the

paper

clip

until

the

tray

opens.

Gently

pull

out

the tray

until

you

can

remove

the

CD.

45mm

1.8in

Playing

an

audio

CD

To

play

an

audio

CD,

you

must

have

an

audio-CD

program

installed

in

your

computer.

If

you

are

using

the

40X-17X Internal

IDE

CD-ROM

Drive

with DOS,

there

is

a

program included

on

the

Option Diskette

that

will

allow

you

to

play

audio

CDs.

Windows

3.x, Windows

95,

Windows 98,

Windows

NT,

and

OS/2

all

come

with

multimedia

extensions

that

include

audio

CD

player

programs.

Follow

the

procedures below

which

correspond

to

your

operating

system.

For

more

information on

using

your

audio

playback

software,

see

the

documentation

that

comes

with

your

operating

system

or

your

computer.

Windows 95 or Windows 98

To use the Windows 95 or Windows 98 audio utility:

1.

Turn

on

your

computer

and

start

your

operating system,

if

you

have

not

already

done

so.

2.

Insert

an

audio

CD

into

the

CD-ROM

drive.

3.

Click

Start

-->Programs

-->Accessories

-->Multimedia

-->Media

Player

.

4.

When

the

Media

Player

window

opens,

double-click

the

Media

Player

icon.

5.

Double-click

Device .

6.

Double-click

CD

Audio

.

If you

do

not

see

theMedia

Player

orCD

Audio

icons

within

the

Media

Player

folder,

you

must install

the

Windows

CD

Audio

device

driver

as

follows:

1.

Double-click

My

Computer

-->Control

Panel

-->Multimedia

.

2.

Click

the

Advanced

tab.

3.

Double-click

Media

Control

Devices

-->CD

Audio

Devices

.

4.

Make

sure

that

the

CD

device

driver

is

enabled.

If

the

driver

is

not

present or is

disabled, install

the

driver.

2-4 40X-17X Internal IDE CD-ROM Drive