IBM 37L1388 manual Driver For, 16 40X-17X Internal IDE CD-ROM Drive

Installing

the

device

driver

for

DOS

and

OS/2

1.

Turn

on

your

computer

and

start

your

operating

system,

if

you

have

not

already

done

so.

2.

Go

to

a

command

line.

3.

Insert

the40X-17X Internal IDE CD-ROM Drive Option Diskette

into

your

diskette

drive.

4.

Type

A:CDSETUP

in

the

command

line;

then press

Enter.

5.

Using

your

mouse

or

the

arrow

keys,

selectSetup

;

then

press

Enter.

6.

Follow

the

instructions

on

your

screen

to

properly

install

the

driver.

7.

When

setup

is

complete,

select

Exit .

8.

When

prompted,

restart

your

system;

the

changes

will

not

take

effect

until

you do

so.

Note:

To

resolve

resource

conflicts

or

if

you

need

options

that

are

not

found

in

the

CDSETUP device-driver installation

program,

refer

to

the

READ.ME

file

on

the

Option

Diskette.

If

you

have

problems

installing

the

device driver,

refer

to

the

CDSETUP program

help

information.

Installing

the

device

driver

for

Windows

NT

4.0

Windows

NT

4.0

automatically

detects

the

presence

of

the

CD-ROM

drive.

No

additional

steps

are required to activate the

device

drivers.

If

your

operating

system

does

not

automatically

detect

the

CD-ROM

drive,

refer

to

the

documentation

that

comes

with

your

operating

system

to

see

what

course

of

action

you

need

to

take.

Some

computers

that

come

with

Windows

NT pre-installed contain a

PIIXIDE

device

driver.

This

device

driver

replaces

the

Windows

NT

native

ATAPI

device

driver,

and

provides

DMA

support.

The

IDE

CD-ROM

will

not

work

if

both

the

ATAPI

and

PIIXIDE

device

drivers

are

enabled

at

the

same

time.

To

determine

which

device

driver

is

enabled:

1.

Click

Start

-->Settings

-->Control

Panel

.

2.

Double-click

System .

3.

Click

the

Device

Manager

tab.

4.

Double-click

CD-ROM

to

display

a

list

of

available

device

drivers.

5.

Click

one

of

the

listed

device

drivers;

then

click

Propertiesthe

button.

6.

Click

the

Settings

tab

and

determine

if

the

driver

is

enabled

or

not.

7.

Perform

the

above

steps

for

the

other

driver.

8.

Enable

the

driver

you

wish

to

use.

9.

Shut

down

and

restart

your

computer.

1-16 40X-17X Internal IDE CD-ROM Drive