a hard disk drive, attach it to the connector at the other end of the cable and attach the
You cannot format a CD-RW disc
Take the following actions:
1.Verify that your system has the latest level IDE controller device driver. See the documentation for your computer or IDE controller to determine which device driver file to look for.
2.Verify that you have the correct speed media for your write speed. Low speed (less than 4x) media cannot be formatted by this
You cannot create a multi-session disc.
Be sure that there is enough space left on the media for another session. Writing a session requires about 15 MB in addition to the data that is recorded.
You cannot successfully write to a CD-R or CD-RW disc.
Take the following action:
1.Verify that the process is not being interrupted by a screen saver, an antivirus program, an Internet or
2.Verify that your computer has the minimum processor listed in the system requirements for this option. See “System requirements” on page
3.Verify that the hard disk drive has been defragmented.
4.Replace the disc if it is damaged or scratched.
5.Verify that the
You cannot eject a CD.
Take the following actions after ensuring that the drive is not in the process of writing:
1.Close all applications.
2.Eject the CD with the software application.
3.Use the Eject/Load button.
4.Turn off the computer. Wait 45 seconds; then turn on the computer and try using the Eject/Load button again.
5.If other methods do not work, use the
You cannot read from the CD after successfully writing to it.
Take the following actions: