Fujitsu Siemens Computers BX600 manual Assigning Server Module Names, Analog Operation

Analog Operation Assigning Server Module Names

Figure 9: Setup Dialog Box

3.4.1Assigning Server Module Names

Use the Names dialog box to identify server modules by name rather than by slot number. The Names list is always sorted by slot order.

To access the Names dialog box:

Press Print Screen. The Main dialog box will appear.

Click Setup and then click Names. The Names dialog box appears.

Figure 10: Names Dialog Box

NOTE: If the BX600 Digital KVM Switch System discovers new server modules, the on-screen list will automatically update. The mouse cursor will change into an hourglass during the update and the system will not accept mouse or keyboard input.

NOTE: The BX600 Digital KVM Switch stores the Server Module names. If you move a Server Module to a new slot or chassis, the name will not move with it, so the module must be reassigned a name in the new location.

To assign names to server modules:

In the Names dialog box, select the name or slot number you wish to change and click Modify. The Name Modify dialog box appears.

590-673-501A 15