Fujitsu Siemens Computers BX600 Scanning Your System Analog Operation, To start the scan mode

Scanning Your System Analog Operation

Figure 17: Scan Dialog Box

The dialog box contains a listing of all the server modules attached to your unit. Click to enable the check box next to the server modules you wish to scan.

-or-

Double-click on a Server Module's name or slot. -or-

Press Alt+ the number of the Server Module you wish to scan. You can select up to 10 server modules.

In the Scan Time field, type the number of seconds (from 3 to 99) of desired time before the scan moves to the next Server Module in the sequence.

Click OK.

To remove a Server Module from the Scan list:

In the Scan dialog box, click to disable the check box next to a Server Module to be removed.

-or-

Double-click on a Server Module's name or slot. -or-

Click Clear to remove all server modules from the Scan list Click OK.

To start the scan mode:

Press Print Screen. The Main dialog box will appear.

Click Commands. The Command dialog box appears.

22 590-673-501A