Setting Console Security | Analog Operation |
To automatically log out of a Server Module when inactive:
In the Main dialog box, click Setup and then click Security. If you have password protection, the Password dialog box appears.
Type your password, and then click OK. The Security dialog box appears.
In the Inactivity Time field, enter the length of time you want to stay connected to a Server Module before it automatically disengages you.
Click OK.
To remove password protection from your console:
In the Main dialog box, click Setup and then click Security. The Password dialog box appears.
Type your password, and then click OK.
In the Security dialog box,
Click OK if you only want to eliminate your password.
To enable the screen saver mode with no password protection:
CAUTION: There is no master password. The BX600 appliance must be sent to Fujitsu Siemens in the case of a
lost password.
If your console does not require a password to gain access to the Security dialog box, continue to the next step.
- or -
If your console is password protected, see the previous procedure, To remove password protection from your console:
Select Enable Screen Saver.
Type the number of minutes for delay time (from 1 to 99) that you want to delay acti- vation of the screen saver.
Choose Energy if your monitor is ENERGY STAR™ compliant; otherwise select Screen.
CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with ENERGY
STAR™.
(Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you to the Security dialog box.
Click OK.
NOTE: Activation of the screen saver mode disconnects the user from a Server Module; no Server Module is
selected. The status flag displays Free.
To exit the screen saver mode:
Press any key or move your mouse. The Main dialog box appears.
20 |