Cisco Systems WS-C6513-E-RF manual Requirements, Ad-Hoc Conferencing and Transcoding Port Adapter

Page 6

Requirements

Figure 3

24-Port FXS Port Adapter Front Panel Features

Receive port LEDs

WS-SVC-CMM-24FXS

FXS Interface Board Adapter

98289

RJ-21 connector

Table 4

24-Port FXS Port Adapter Receive Port LEDs

Color

Green

Off

Description

Port is off-hook or ringing.

Port is not active (connected device on-hook) or is disabled through the CLI.

Ad-Hoc Conferencing and Transcoding Port Adapter

The front panel features of the ad-hoc conferencing and transcoding port adapter are shown in Figure 4, and the STATUS LED is described in Table 5.

Figure 4

Ad-Hoc Conferencing and Transcoding Port Adapter Front Panel Features

 

 

WS-SVC-CMM-ACT

 

 

 

 

Ad-hoc Conferencing and Transcoding Port Adapter

99302

Table 5

Ad-Hoc Conferencing and Transcoding Port Adapter STATUS LED

Color

Green

Red

Off

Description

Port adapter is up and operational.

Port adapter is shut down.

Port adapter is not located by the system.

Requirements

These sections describe the hardware and software requirements:

Hardware Requirements, page 7

Software Requirements, page 7

Cisco Communication Media Module for Catalyst 6500 Series Switch and Cisco 7600 Series Router Installation and Verification Note

6

Image 6
Contents Product Number WS-SVC-CMM Contents Front Panel DescriptionsColor DescriptionPort T1 and E1 Port Adapters Color DescriptionPort FXS Port Adapter Shows the front panel of the 24-port FXS port adapterRequirements Ad-Hoc Conferencing and Transcoding Port AdapterSafety Overview Hardware RequirementsSoftware Requirements Safety Overview Safety Overview Installing and Removing the Module Installing the ModuleRequired Tools Horizontal slots Positioning the Module in a Horizontal Slot Chassis Press down Vertical slots Ejector Lever Closure in a Horizontal Slot ChassisPositioning the Module in a Vertical Slot Chassis Press left Removing the Module Ejector Lever Closure in a Vertical Slot ChassisHorizontal slots Removing and Replacing Port Adapters Removing a Port Adapter from Module Slots 1 throughModule Bottom View Module Top View with Port Adapters Installed Installing a Port Adapter in Module Slots 1 through Removing and Replacing Port Adapters Removing and Replacing Port Adapters Verifying the Installation RJ-45 Port Connector and Cabling SpecificationsPin1 Description Receive R1 Receive T1 Not connected Transmit R Transmit TRJ-21 Port Connector and Cabling Specifications RJ-21 Telco Interface 90-Degree Cable ConnectorAccessing the Port Adapter Ports Port Connector Pin Number SignalConfiguring the Port Adapter Ports Configuring the Port Adapter Clock SourceDisaster Recovery for Module Software Upgrades Slot0ws-svc-cmmDisaster Recovery for Module Software Upgrades Password Recovery Regulatory Standards Compliance Related Documentation

6513-E, 6500-E, WS-C6513-E-RF specifications

Cisco Systems is renowned for its networking and telecommunications equipment, and its Catalyst 6500-E series, including models like the 6513-E and WS-C6513-E-RF, exemplifies cutting-edge technology in enterprise networking. The Catalyst 6500-E series switches are versatile, high-performance devices designed to meet the demands of large enterprises and data centers.

The Cisco Catalyst 6513-E switch is a modular chassis that supports a variety of interface modules and line cards, allowing sleek customization and scalability to accommodate growing networks. The 6513-E features a 13-slot architecture, allowing for up to 11 modules, plus a dedicated supervisor engine for enhanced performance and reliability. This switch can support a mix of Ethernet, Fast Ethernet, and Gigabit Ethernet interfaces, providing great flexibility depending on network requirements.

One of the hallmark technologies of the 6500-E series is Cisco's Virtual Switching System (VSS), which enables two physical switches to operate as a single logical switch. This feature significantly enhances redundancy and improves manageability by allowing network administrators to treat multiple devices as one. The series supports sophisticated features such as Cisco's Enhanced Quality of Service (QoS) capabilities, which enable fine-tuned traffic management to prioritize critical applications and ensure optimal performance throughout the network.

Security is a paramount concern for enterprise environments, and the 6500-E series incorporates robust security features through Cisco's TrustSec technology. This function allows for the creation of secure segments within the network, improving protection against potential threats. Additionally, the switches support advanced authentication features like 802.1X, enabling secure device access.

The WS-C6513-E-RF model, which stands for “Refurbished,” offers an economical option without sacrificing the performance and reliability inherent in the series. These switches are particularly appealing to budget-conscious organizations that still need the advanced features of Cisco products.

Overall, the Cisco Systems Catalyst 6500-E series is a cornerstone for enterprise networking. With its modular design, VSS capabilities, advanced QoS features, and comprehensive security measures, it remains an ideal solution for organizations looking to build a scalable and secure network infrastructure. Its versatility through the WS-C6513-E-RF variant allows businesses of all sizes to leverage high-performance networking without a heavy financial burden. As networking demands evolve, the Catalyst 6500-E series continues to be a key player in delivering reliable and efficient networking solutions.